• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

FS: Peerless SLS 830667 8", PPB 830870 4", Madisound OEM 8" Woofers, LPG Tweeters

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
FS: Peerless SLS 830667 8", PPB 830870 4", Madisound OEM 8" Woofers, LPG Tweeters

click the titles for specs...
Email me at daddyoppe(at)aol(dot)com for a quicker response.

Peerless SLS 830667 8" Woofers

Both woofers are in great condition with some slight cosmetic blemishes

$90 Shipped

An externally hosted image should be here but it was not working when we last tested it.


Peerless PPB 830870 4" Woofers

Both woofers are in great condition with the exception that one has a 1/2" superficial cut on the dust cap (not all the way through).

$50 Shipped

IMG_1307.jpg


LPG 26NA aluminum Dome car Tweeters w/ Flush & Hinged Mounts

The tweeters are in perfect condition. The hinged mounts are new and the flush mounts are in good shape.

$60 Shipped

IMG_1296.jpg


Madisound Special Purchase 8" OEM Woofers

$35 Shipped


Both woofers have never been mounted and only 1 has seen a couple minutes of power. These would be a great set of midbass drivers for a door install with the high QTS & VAS values.

Specs:
8 ohm
Poly cone with textile dust cap.*
Inverted rubber surround.*
Good for sealed boxes of 0.5 cubic feet up to 1 cubic feet
33mm voice coil diameter

Flange diameter 215mm (8.5")
Cut out hole size 185mm (7.25")
Depth 86mm (3.4")

Fs 49.5Hz
Re 7.3 ohm
Qms 3.75
Qes 1.10
Qts 0.85
Vas 36.9 liters
Sd 220 cm2
BL 6.3
Cms 536.8 uM/N
Mms 19.2 g
Le 0.8mH @ 1kHz
Sensitivity 87.6dB @ 2.83V/1M
Power 50 Watt

An externally hosted image should be here but it was not working when we last tested it.
 
Last edited:
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.