FS: 350Hz Tractrix Edgarhorn pair

doucanoe · 11:27 PM

I've decided to let go of my 350Hz round Tractrix Edgarhorns and thought that I would see if someone here might be interested. I have run with these for quite some time in my main system and have been entirely thrilled with them. However, fall session is just around the corner and papa needs to take care of a little college tuition so off they go.

The finish is 7-8 applications of low gloss Tung oil using steel wool between applications. Very nice finish and wonderful condition overall. No cracks or splits. The specie of wood for turning was Poplar as most of Bruce's horns are that I'm aware of. The character/coloration of the wood runs from honey to chocolate and is a very pretty pair in my opinion.

The 350Hz Edgarhorn was designed for use with 2" or 1.4" compression drivers (with 1.4" adapters also by Bruce). I will include the 1.4" adapters with the horns.

This pair was completed in Sept. of '03 as evidenced in the photos. I purchased them a year or so ago by a gentleman who ordered this pair from Bruce but left them boxed and never used them. I finished them myself after acquiring them.

The rest of the photos are in the following Photobucket File. If you would like to see more specific pics just let me know.

350Hz Edgarhorn pictures by dou1 - Photobucket

$900 obo shipped (with 1.4"adapters included) within the Continental US.

Thanks

MikeR · 16th August 2010, 04:11 PM

pm sent

doucanoe · 16th August 2010, 04:51 PM

I got it Mike! Responded, same.

doucanoe · 16th August 2010, 09:34 PM

Sold!

Thanks MikeR.

RC

limono · 17th August 2010, 12:48 AM

MIkeR
You've got a PM!

15th August 2010, 11:21 PM	#1
doucanoe diyAudio Member Join Date: Jul 2007 Location: Maplewood MN	FS: 350Hz Tractrix Edgarhorn pair I've decided to let go of my 350Hz round Tractrix Edgarhorns and thought that I would see if someone here might be interested. I have run with these for quite some time in my main system and have been entirely thrilled with them. However, fall session is just around the corner and papa needs to take care of a little college tuition so off they go. The finish is 7-8 applications of low gloss Tung oil using steel wool between applications. Very nice finish and wonderful condition overall. No cracks or splits. The specie of wood for turning was Poplar as most of Bruce's horns are that I'm aware of. The character/coloration of the wood runs from honey to chocolate and is a very pretty pair in my opinion. The 350Hz Edgarhorn was designed for use with 2" or 1.4" compression drivers (with 1.4" adapters also by Bruce). I will include the 1.4" adapters with the horns. This pair was completed in Sept. of '03 as evidenced in the photos. I purchased them a year or so ago by a gentleman who ordered this pair from Bruce but left them boxed and never used them. I finished them myself after acquiring them. The rest of the photos are in the following Photobucket File. If you would like to see more specific pics just let me know. 350Hz Edgarhorn pictures by dou1 - Photobucket $900 obo shipped (with 1.4"adapters included) within the Continental US. Thanks Last edited by doucanoe; 15th August 2010 at 11:27 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Edgarhorn Seismic Sub	skushino	Swap Meet	1	25th June 2010 04:56 AM
FS: pair of w3-871s drivers $35/pair	norman bates	Swap Meet	1	10th November 2008 08:51 AM
FS: Edgarhorn 300hz horns, JBL LE5-2's, and Lambda TD15M & crossover parts	Rescue Toaster	Swap Meet	2	3rd January 2007 04:34 PM
FS or trade 1 pair Dynavox 6.5" woofers, 1 pair of Tweets..	JCoffey	Swap Meet	4	20th September 2006 04:56 PM
FS 350hz edgarhorns	rich christie	Swap Meet	4	9th December 2005 06:28 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

16th August 2010, 04:11 PM	#2
MikeR diyAudio Member Join Date: Feb 2004 Location: Michigan	pm sent

16th August 2010, 04:51 PM	#3
doucanoe diyAudio Member Join Date: Jul 2007 Location: Maplewood MN	I got it Mike! Responded, same.

16th August 2010, 09:34 PM	#4
doucanoe diyAudio Member Join Date: Jul 2007 Location: Maplewood MN	Sold! Thanks MikeR. RC

17th August 2010, 12:48 AM	#5
limono diyAudio Member Join Date: Mar 2007	MIkeR You've got a PM!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)