FS: 1xJVC EZ51, 1x Sanyo MCD-ZX530F Dismantled and 1x Sanyo MCD-ZX530F-Australia Only

thermos · 7th August 2010, 02:49 PM

Hi All,

I have for sale:- (Australia only - due to postage costs)

1x JVC EZ-51 with remote. Item was purchased from a store in the UK (reconditioned) and sent by the relatives to Australia. I was always going to make it to a Shigaclone but never got around to doing it. Item has been in cupboard for around 2 years. I only have the unit+remote (no box, manual etc). CD player tested before this listing.
$100 + postage.

Whilst waiting for the JVC I bought:-

1xSanyo MCD-ZX530F which has been gutted and the digital out connected.
Please see picture.
$60+postage.

Please read for more details:-
Finally, an affordable CD Transport: the Shigaclone story

1x Sanyo MCD-ZX530F. Purchased new and never used. Includes box,manual but I cannot see the power cable.
$60+post

1x remote control to suit JVC EZ-51 $15+post.

Regards Jeremy

Marlowe · 9th August 2010, 03:12 AM

Could Sanyo MCD-ZX530F be used for Shigaclone project?

thermos · 9th August 2010, 04:38 AM

I had the intention of using it as the basis of one.

Finally, an affordable CD Transport: the Shigaclone story
Originally posted by thermos
I thought I would try and buy a Sanyo MCD-ZX530F.
It is quite a simple unit and made sure it didnt support MP3s.

On opening it up it has the same CD-06 (K17T40/41) Board with
DOUT etc.

Although, it does not have a LC78601R but rather a LC78602R.
Is this OK? Any advice would be appreciated.

The other chip is a LA9242.

thermos · 16th August 2010, 03:10 PM

Prices of original post in Australian dollars

dijke308 · 9th September 2010, 03:10 PM

How much will the EZ51 be, shipping to the Netherlands included? I am very interested in buying it, to make a shigaclone.

thermos · 11th September 2010, 03:04 PM

Quote:

Originally Posted by dijke308

How much will the EZ51 be, shipping to the Netherlands included? I am very interested in buying it, to make a shigaclone.

PM Sent

dijke308 · 11th September 2010, 04:01 PM

Thanks! But can you repost it, as I haven't received your PM?

thermos · 11th September 2010, 11:31 PM

Quote:

Originally Posted by dijke308

Thanks! But can you repost it, as I haven't received your PM?

Sorry, I thought I sent an PM but I actually selected send an email.

It is approximately A$60 seamail and A$120 airmail.
Neither of these are trackable.

Beyond this there is express post which is around A$130.

Regards
Jeremy

billo44 · 13th October 2010, 02:18 PM

Hi folks I searched high and low (and this thread) but I can't find out if anyone has gutted the JVC RC-EZ57 which is available here in Japan.
Looks exactly like the JVC RC-EZ51 to my tired eyes...
Any one know?
Might have to buy 1 to find out....

brgds
Bill

thermos · 23rd October 2010, 04:07 AM

I have no longer any use for these items, therefore I will reduce the price of the EZ-51 to $80 and the price of MCD-ZX530F to $50 ea.
This price does not include shipping.

9th August 2010, 03:12 AM	#2
Marlowe diyAudio Member Join Date: Feb 2003	Could Sanyo MCD-ZX530F be used for Shigaclone project? __________________ Here's looking at you, kid.

13th October 2010, 02:18 PM	#9
billo44 diyAudio Member Join Date: Sep 2009 Location: Nagano Japan	JVC RC-EZ57 Hi folks I searched high and low (and this thread) but I can't find out if anyone has gutted the JVC RC-EZ57 which is available here in Japan. Looks exactly like the JVC RC-EZ51 to my tired eyes... Any one know? Might have to buy 1 to find out.... brgds Bill

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: 1x Peerless 830860, 1x Vifa D25ASG-05-06 both unused	chevy66	Swap Meet	0	12th May 2009 12:00 PM
FS:AD1865N-K NON OVER SAMPLING DAC 2.1x PROTOTYPE	rubydac	Swap Meet	5	17th May 2008 02:00 AM
FS: 1x Tripath TA0103A	speaker	Swap Meet	3	4th December 2007 12:18 PM
FS: Sanyo Oscon...	Htguy	Swap Meet	0	1st June 2005 04:58 AM
FS: Westlake HR-1X Crossover	Osteele	Swap Meet	0	24th January 2005 03:35 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

9th August 2010, 04:38 AM	#3
thermos diyAudio Member Join Date: Dec 2007	I had the intention of using it as the basis of one. Finally, an affordable CD Transport: the Shigaclone story Originally posted by thermos I thought I would try and buy a Sanyo MCD-ZX530F. It is quite a simple unit and made sure it didnt support MP3s. On opening it up it has the same CD-06 (K17T40/41) Board with DOUT etc. Although, it does not have a LC78601R but rather a LC78602R. Is this OK? Any advice would be appreciated. The other chip is a LA9242.

16th August 2010, 03:10 PM	#4
thermos diyAudio Member Join Date: Dec 2007	Prices of original post in Australian dollars

9th September 2010, 03:10 PM	#5
dijke308 diyAudio Member Join Date: Jun 2006	How much will the EZ51 be, shipping to the Netherlands included? I am very interested in buying it, to make a shigaclone.

11th September 2010, 04:01 PM	#7
dijke308 diyAudio Member Join Date: Jun 2006	Thanks! But can you repost it, as I haven't received your PM?

23rd October 2010, 04:07 AM	#10
thermos diyAudio Member Join Date: Dec 2007	I have no longer any use for these items, therefore I will reduce the price of the EZ-51 to $80 and the price of MCD-ZX530F to $50 ea. This price does not include shipping.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)