Phillips CDM4/19 laser assembly

grahamfocal · 6th August 2010, 05:45 PM

a perfectly good Phillips CDM4/19 laser assembly, bought from Germany but no longer required, as the problem with my CD player is not the laser assembly.
I am not looking to make a profit on it, so its up for £47 ex postage (no offers)

Thanks.

Dagwood · 7th August 2010, 08:37 AM

Hi Graham

I'm planning a diy toploader and wondered if this is the laser only or the complete swing arm assembly? Is the unit new or salvaged?

Thanks

grahamfocal · 09:00 AM

its the complete unit. Basically the unit that I had (Orelle CD100) I had presumed that the laser had gone, but upon installing a new one, found the same fault. The old laser (the one I am selling) reads the TOC fine and goes through the tracks at lightening speed, so seems fine, the problem with my CD player I think, is a servo CAP (thanks to the guys on here for that)
I am only selling this one as opposed to the new one that I bought because I dont want to take the unit apart again, as it was a bit of a faff getting it in.

So I am selling this one as 100% working, if not I will consider money back to you, as I trust the guys on here to be honest with me.

If you want me to email you some pictures send me a private message with an email address.

grahamfocal · 7th August 2010, 08:59 AM

Quote:

Originally Posted by grahamfocal

a perfectly good Phillips CDM4/19 laser assembly, bought from Germany but no longer required, as the problem with my CD player is not the laser assembly.
I am not looking to make a profit on it, so its up for £47 ex postage (no offers)

Thanks.

To be exact this is the old complete laser assembly with swing arm from my CD player in 100% working order and immaculate condition, apologies for any confusion, only kept the new one in the player as it was a faff to install, and dont want to remove it again.

grahamfocal · 7th August 2010, 03:34 PM

pics for Ben and anyone else interested of course.

grahamfocal · 7th August 2010, 03:40 PM

Ben has first dibs of course.

Dagwood · 7th August 2010, 04:16 PM

Thanks Graham

I think I may have bitten off more than I can chew on this one. I cannot find driver boards for this unit anywhere?? I may have to bit the bullet and go for the CD-PRO2 kit?
Saving pennies as we speak!

grahamfocal · 7th August 2010, 04:19 PM

No problem.

Still for sale....anyone? offers are welcome, as want it sold, to please SWMBO

grahamfocal · 11th August 2010, 06:04 PM

£25? ex post, bargain.

grahamfocal · 12th August 2010, 11:14 AM

anyone? this is a bargain at £25.00

6th August 2010, 05:45 PM	#1
grahamfocal diyAudio Member Join Date: Jan 2008 Location: Tintinhull Somerset	Phillips CDM4/19 laser assembly a perfectly good Phillips CDM4/19 laser assembly, bought from Germany but no longer required, as the problem with my CD player is not the laser assembly. I am not looking to make a profit on it, so its up for £47 ex postage (no offers) Thanks.

7th August 2010, 08:56 AM	#3
grahamfocal diyAudio Member Join Date: Jan 2008 Location: Tintinhull Somerset	its the complete unit. Basically the unit that I had (Orelle CD100) I had presumed that the laser had gone, but upon installing a new one, found the same fault. The old laser (the one I am selling) reads the TOC fine and goes through the tracks at lightening speed, so seems fine, the problem with my CD player I think, is a servo CAP (thanks to the guys on here for that) I am only selling this one as opposed to the new one that I bought because I dont want to take the unit apart again, as it was a bit of a faff getting it in. So I am selling this one as 100% working, if not I will consider money back to you, as I trust the guys on here to be honest with me. If you want me to email you some pictures send me a private message with an email address. Last edited by grahamfocal; 7th August 2010 at 09:00 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Philips Laser Assembly CDM4/19	inttech1	Digital Source	2	26th March 2008 12:34 AM
Rotel RCD-950. Does it use the phillips CDM4 transport	johnandchris	Digital Source	6	8th March 2008 09:54 PM
FS: CDM4/19 Laser mechanism + tray assembly	honinbou	Swap Meet	2	6th August 2007 10:46 PM
Repairing CDM4/19 (with CDM4/31???)	Shaun	Digital Source	4	1st August 2003 12:29 PM
Where to get CDM4/19 laser?	Shaun	Parts	2	28th May 2003 05:19 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

7th August 2010, 08:37 AM	#2
Dagwood diyAudio Member Join Date: Feb 2010 Location: North of Auckland	Hi Graham I'm planning a diy toploader and wondered if this is the laser only or the complete swing arm assembly? Is the unit new or salvaged? Thanks

7th August 2010, 03:34 PM	#5
grahamfocal diyAudio Member Join Date: Jan 2008 Location: Tintinhull Somerset	pics for Ben and anyone else interested of course.

7th August 2010, 03:40 PM	#6
grahamfocal diyAudio Member Join Date: Jan 2008 Location: Tintinhull Somerset	Ben has first dibs of course.

7th August 2010, 04:16 PM	#7
Dagwood diyAudio Member Join Date: Feb 2010 Location: North of Auckland	Thanks Graham I think I may have bitten off more than I can chew on this one. I cannot find driver boards for this unit anywhere?? I may have to bit the bullet and go for the CD-PRO2 kit? Saving pennies as we speak!

7th August 2010, 04:19 PM	#8
grahamfocal diyAudio Member Join Date: Jan 2008 Location: Tintinhull Somerset	No problem. Still for sale....anyone? offers are welcome, as want it sold, to please SWMBO

11th August 2010, 06:04 PM	#9
grahamfocal diyAudio Member Join Date: Jan 2008 Location: Tintinhull Somerset	£25? ex post, bargain.

12th August 2010, 11:14 AM	#10
grahamfocal diyAudio Member Join Date: Jan 2008 Location: Tintinhull Somerset	anyone? this is a bargain at £25.00

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)