MyRef C parts for sale

madisonears · 11:32 PM

I have available the following items.

Two transformers, 120v, 50/60Hz 160VA transformers from the previous group buy. They have single primary, dual 24v secondaries, which is exactly what you need to run the MyRef as monoblocks. Of course you could put both transformers in a single case if that's the way you're building. $22 each.

A set of four power supply caps, 10,000uf/50v, also from the previous group buy. These are Mallory LPX caps, rated at 85 deg C. Yes, they fit the board. $10 for all four.

A pair of Caddock 0.5 ohm, 15W power resistors, MP-915, from the current Premium BOM group buy. $6 for both.

A pair of heatsinks for the Caddocks, also from the current group buy. $3 for both.

Six 1N4001 diodes $1

All parts are new, never soldered. $60 plus shipping from 53714 takes it all.

Peace,
Tom E

madisonears · 4th August 2010, 02:44 PM

Transformers reduced to $20 each, and reduced to $55, plus shipping, for all, and I'll throw in six of the quick connect terminal lugs for soldering to the board.

Peace,
Tom E

madisonears · 18th August 2010, 05:06 PM

All sold.

Tom E

31st July 2010, 11:30 PM	#1
madisonears diyAudio Member Join Date: Sep 2007	MyRef C parts for sale I have available the following items. Two transformers, 120v, 50/60Hz 160VA transformers from the previous group buy. They have single primary, dual 24v secondaries, which is exactly what you need to run the MyRef as monoblocks. Of course you could put both transformers in a single case if that's the way you're building. $22 each. A set of four power supply caps, 10,000uf/50v, also from the previous group buy. These are Mallory LPX caps, rated at 85 deg C. Yes, they fit the board. $10 for all four. A pair of Caddock 0.5 ohm, 15W power resistors, MP-915, from the current Premium BOM group buy. $6 for both. A pair of heatsinks for the Caddocks, also from the current group buy. $3 for both. Six 1N4001 diodes $1 All parts are new, never soldered. $60 plus shipping from 53714 takes it all. Peace, Tom E Last edited by madisonears; 31st July 2010 at 11:32 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Open call for MyRef Parts	bcmbob	Chip Amps	3	31st July 2010 11:31 PM
FS: MyRef Rev C pair	Mindcrime	Swap Meet	2	9th November 2009 11:41 PM
MyRef PCB Boards for Trade NOT SALE	udailey	Swap Meet	0	3rd November 2008 09:48 PM
MyRef Rev C or Amp 5?	preiter	Chip Amps	2	30th January 2007 06:28 PM
Troubleshooting the LM3886 MyRef	Groundloops	Chip Amps	3	1st April 2006 08:21 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

4th August 2010, 02:44 PM	#2
madisonears diyAudio Member Join Date: Sep 2007	Transformers reduced to $20 each, and reduced to $55, plus shipping, for all, and I'll throw in six of the quick connect terminal lugs for soldering to the board. Peace, Tom E

18th August 2010, 05:06 PM	#3
madisonears diyAudio Member Join Date: Sep 2007	All sold. Tom E