• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

FS: Blueprint 1503 Sub Driver + Nady XA-1100 Amp

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
N

needtubes

Member
Joined 2003
I am cleaning out my closets and would like to sell these. I used the 1503 in a 6 cubic foot enclosure tuned to about 16Hz and powered it with the Nady. It worked and sounded great as an HT sub, but circumstances have forced me out of HT. Both have been stored in my attic for a few years.

$150+S/H for the Blueprint
$175+S/H for the Nady

** The specs on the 1503 are below.

Original Published Specs:
Qts 0.3
Qes 0.32
Qms 7.9
Vas 132 liters
Fs 26.8 Hz
Re 3.6 ohms
Sd 804 cm^2
Xmax 25.9 mm
BL 22.1
SPL 91 dB
Pe 1000 Watts

From DUMAX report:
Qts 0.376
Qes 0.411
Qms 4.458
Vas 92 liters
Fs 25.52 Hz
Re 3.93
Sd 737 cm^2
Xmax 25.9 mm
BL 22.35
SPL 87.74 dB
Pe 1000 Watts

** The Nady will do 2x475W into 4-ohms, or 1100W bridged into 8-ohms.

90372d1186170779-fs-blueprint-1503-15-subwoofer-nady-audio-xa-1100-power-amp-blueprint.jpg


90373d1186171033-fs-blueprint-1503-15-subwoofer-nady-audio-xa-1100-power-amp-nady.jpg


Thank you!
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom