Exposure 2010 Amplifier

ANDYLASER · 20th June 2010, 04:45 PM

Here is an interesting item for sale. The Exposure 2010 is a well reviewed integrated amplifier. I picked this up a few years ago, but never got around to sorting it out. For some reason, it is missing its transformer and resevoir capacitors.

As you can see from the pictures, there are no marks where the transformer is usually bolted down and there are no traces of solder where the resevoir caps fit. I can only assume they were never fitted, as is certainly doesnt look like they have been removed.

The amp itself is in very good cosmetic condition.

Although there is one very feint scratch near the volume control.

There are also a number of the case screws missing.

Here is what it should look like with the transformer and caps fitted.

Exposure have stated a new transformer will cost £45 and I expect some good caps can be obtained for £15 approx.

These usually sell for approx £350 on ebay. Due to the requirements of a couple of hours work and the cost needed to buy the missing parts, I am prepared to let this go quite cheaply and someone can grab a bargain here.

Price including UK delivery £200. I am happy to ship worldwide at additional cost if required.

limono · 21st June 2010, 01:06 AM

How do you know it's working? It's a cat in sack really.

ANDYLASER · 16th July 2010, 08:01 PM

You have a good point. However, if someone really wanted this amp, I would be prepared to send it on approval for a minimal cost, say £25. If its good, they pay the rest. If it isnt, (and there is no reason for it not to be) they have a good case and motorised volume control for their outlay.

Cant say fairer than that can I?

ANDYLASER · 23rd July 2010, 06:20 PM

Bump.

Sensible offers are invited for this project amp.

limono · 24th July 2010, 04:05 AM

Maybe a trade for a pair of cool Altec 811B horns in really nice condition would interest you? Regards, L

ANDYLASER · 20th November 2010, 12:25 PM

Bump - any interest?

jmillerdoc · 21st November 2010, 05:30 AM

YGPM

limono · 21st November 2010, 02:47 PM

Jmillerdoc
I spotted your dangerously vigorous activity here. Watch out on that closet space!

jmillerdoc · 21st November 2010, 10:19 PM

Is it that obvious? Are you interested I selling the Altecs, LOL....

Just so happens a lot of peoplea have been selling a bunch of items I need or want right now. I go in spurts but it is true, I have spent some coin the past week here at the swap meet. I am building a few different style of amps that need higher sense speakers so bought those, needed to finish my surround drivers to match my Proac clones so bought the SS 18w8545ks, building a line array with some BG neo 8s so the extra pair of the clones will go with those....this amp just looks like fun to complete and if it sounds good I have a place for it, if not will just sell it off.

I have tried to sell some of my stuff but no takers so that closet will remain full for a while.f

limono · 21st November 2010, 11:51 PM

I don't have a camera on hand right now but I can hardly cross the room without bumping on some audio junk

. As to altecs I don't know , they are obvious disaster but nothing play electric guitar with such a pleasant presence like altec horn. The question is, should one have a special speaker to enjoy electric guitar in full glory?

20th June 2010, 04:45 PM	#1
ANDYLASER diyAudio Member Join Date: Oct 2005	Exposure 2010 Amplifier Here is an interesting item for sale. The Exposure 2010 is a well reviewed integrated amplifier. I picked this up a few years ago, but never got around to sorting it out. For some reason, it is missing its transformer and resevoir capacitors. As you can see from the pictures, there are no marks where the transformer is usually bolted down and there are no traces of solder where the resevoir caps fit. I can only assume they were never fitted, as is certainly doesnt look like they have been removed. The amp itself is in very good cosmetic condition. Although there is one very feint scratch near the volume control. There are also a number of the case screws missing. Here is what it should look like with the transformer and caps fitted. Exposure have stated a new transformer will cost £45 and I expect some good caps can be obtained for £15 approx. These usually sell for approx £350 on ebay. Due to the requirements of a couple of hours work and the cost needed to buy the missing parts, I am prepared to let this go quite cheaply and someone can grab a bargain here. Price including UK delivery £200. I am happy to ship worldwide at additional cost if required.

21st November 2010, 11:51 PM	#10
limono diyAudio Member Join Date: Mar 2007	I don't have a camera on hand right now but I can hardly cross the room without bumping on some audio junk. As to altecs I don't know , they are obvious disaster but nothing play electric guitar with such a pleasant presence like altec horn. The question is, should one have a special speaker to enjoy electric guitar in full glory?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Exposure 2010 No Power Supply	ANDYLASER	Solid State	4	6th June 2011 04:03 PM
Exposure 2010 phono board OPamp?	limono	Analog Line Level	6	4th January 2009 03:34 PM
Need some help fixing my amplifier(Exposure XV)	imperfectcircle	Solid State	8	28th January 2007 04:02 PM
Exposure IV amplifier schematics wanted!	pirinyo	Solid State	7	10th October 2004 07:36 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

21st June 2010, 01:06 AM	#2
limono diyAudio Member Join Date: Mar 2007	How do you know it's working? It's a cat in sack really.

16th July 2010, 08:01 PM	#3
ANDYLASER diyAudio Member Join Date: Oct 2005	You have a good point. However, if someone really wanted this amp, I would be prepared to send it on approval for a minimal cost, say £25. If its good, they pay the rest. If it isnt, (and there is no reason for it not to be) they have a good case and motorised volume control for their outlay. Cant say fairer than that can I?

23rd July 2010, 06:20 PM	#4
ANDYLASER diyAudio Member Join Date: Oct 2005	Bump. Sensible offers are invited for this project amp.

24th July 2010, 04:05 AM	#5
limono diyAudio Member Join Date: Mar 2007	Maybe a trade for a pair of cool Altec 811B horns in really nice condition would interest you? Regards, L

20th November 2010, 12:25 PM	#6
ANDYLASER diyAudio Member Join Date: Oct 2005	Bump - any interest?

21st November 2010, 05:30 AM	#7
jmillerdoc diyAudio Member Join Date: Mar 2009 Location: Lawton, OK, USA	YGPM

21st November 2010, 02:47 PM	#8
limono diyAudio Member Join Date: Mar 2007	Jmillerdoc I spotted your dangerously vigorous activity here. Watch out on that closet space!

21st November 2010, 10:19 PM	#9
jmillerdoc diyAudio Member Join Date: Mar 2009 Location: Lawton, OK, USA	Is it that obvious? Are you interested I selling the Altecs, LOL.... Just so happens a lot of peoplea have been selling a bunch of items I need or want right now. I go in spurts but it is true, I have spent some coin the past week here at the swap meet. I am building a few different style of amps that need higher sense speakers so bought those, needed to finish my surround drivers to match my Proac clones so bought the SS 18w8545ks, building a line array with some BG neo 8s so the extra pair of the clones will go with those....this amp just looks like fun to complete and if it sounds good I have a place for it, if not will just sell it off. I have tried to sell some of my stuff but no takers so that closet will remain full for a while.f