Giant Heatsinks plus Case Kit For Sale

[batee]

I have two of these heat sinks for sale, along with the parts to make a case identical to the one I made for my Aleph 30. $150.00USD plus shipping.

Note: One of the outside fins on one of the heatsinks is slightly bent (see pics). I'm sure a solid metalworker could straighten this with no problems.

Specs
Length: 17.75 in
Width: 9.75 in
Height: 2.28 in
Weight: 10.35 lbs (for each 17.75 in piece)
Thermal Resistance (degrees C / Watt): 0.29
Aavid Extrusion Number: 62725

Link to Aavid Extrusion Profiles

Case Parts
8 - 3/4in x 3/4in x 9-9/16in solid aluminum square rods
1 - 14.5in x 17.75in x 1/8in aluminum bottom plate
1 - 14.5in x 17.75in x 1/16in aluminum top plate

Note: This makes a case that is 19 inches wide, 17.75 inches deep, and 9.75 inches high.

Email me for more info.

Bryan A. Thompson
batee@fidnet.com
Location: Rolla, Missouri, USA

[batee]

No idea how to edit the post above (there is no edit button/link), so I'll try this before re-posting:

I really don't want to throw this stuff away or sell it for scrap!

Price reduced to $100, plus $25 shipping.

Bryan A. Thompson
batee@fidnet.com

[needtubes]

Would these heatsinks be sufficient for a Pass Aleph 5 (60WPC Class-A)?

[batee]

I'm no expert, so ask others on the Pass forum before deciding.

My Aleph 30 runs at about 13-15 degrees C above ambient, so I think it'd probably work.

Thanks!
Bryan