FS: Aleph Power Supply Parts

dantwomey · 18th May 2010, 01:04 PM

My Aleph 5 is being sacrificed to help finance and supply heatsinks for my upcoming F5. Hence the following parts are for sale.

I have two 300VA 30v secondary Toriods for sale. They are Plitron Part #077017201. They are $94++CAN new and I'm asking $45 each and I'll throw in the two 60A bridge rectifiers with each toroid.

Next is the four Hammond 159ZL inductors I used in this power supply. You can read up on their specs at: Hammond Mfg. - D.C. Filter Chokes - (153 - 159 Series)

When you can find them they are 32$CAN each. I'm asking $15.

BTW. My Aleph 5 power supply was modelled after the following schematic:

And finally the caps. These are 68,000uf/50V caps which means each bank in the picture below has 272,000uf or over half a farad for both. Per Kristijan's schematic they they are bypassed with a 4.7uF/600V film cap. Here's a pic of the bare cap:

And here is a picture of the caps as they sit today. As you can see they are properly mounted via the correct capacitor clamps. For the right buyer I will cut these in half and sell them premounted and ready to go. Or sell it as one piece. I'm asking $50 per side or $100 for all eight+Bypass.

Regards,
Dan

thefragger · 18th May 2010, 02:20 PM

PM inbound...

dantwomey · 18th May 2010, 04:55 PM

PM's responded to. Tentatively, capacitors and one toroid gone.

Regards,
Dan

Tea-Bag · 18th May 2010, 05:12 PM

dan,
use those caps in F5. At least half of it.

dantwomey · 18th May 2010, 05:35 PM

Quote:

Originally Posted by Tea-Bag

dan,
use those caps in F5. At least half of it.

A sound suggestion but I've decided to try some different caps. It's the DIYer in me out of control?

Regards,
Dan

Tea-Bag · 18th May 2010, 06:14 PM

I hear you. I have'nt been able to stop myself for some time.

Pocoyo · 11:45 PM

Hi DanT

Dont sell the plitron to anybody
i will take them together

please email me your paypal address

rgds, pocoyo

Pocoyo · 19th May 2010, 12:05 AM

Quote:

Originally Posted by dantwomey

A sound suggestion but I've decided to try some different caps. It's the DIYer in me out of control?

Regards,
Dan

Dont worry, It is normal just make you a little bit crazy

my wife said
If i look you now from bought coffee
you never bought them in starbucks (US$ 5 here),
always looks for the cheaper (US$ 0,5)
but i didnt understand why you bought caps & other thing
nearly US$ 100. Ha ha ha ha

DIY make you happy

Nichicon KG super through reported as one of the best caps supply

Btw a little bit promotion
wanna try these FS : ELNA FOR AUDIO 12000uf 63V

@ US$4 each
shipping for 4 caps US$ 15 / for 8 caps US$ 28 / for 16 caps US$ 40

dantwomey · 19th May 2010, 04:42 PM

As far as I know all that's left is the chokes.

Regards,
Dan

Pocoyo · 19th May 2010, 09:53 PM

Want to transfer

PP Account ?

18th May 2010, 01:04 PM	#1
dantwomey diyAudio Member Join Date: Feb 2002 Location: Canada	FS: Aleph Power Supply Parts My Aleph 5 is being sacrificed to help finance and supply heatsinks for my upcoming F5. Hence the following parts are for sale. I have two 300VA 30v secondary Toriods for sale. They are Plitron Part #077017201. They are $94++CAN new and I'm asking $45 each and I'll throw in the two 60A bridge rectifiers with each toroid. Next is the four Hammond 159ZL inductors I used in this power supply. You can read up on their specs at: Hammond Mfg. - D.C. Filter Chokes - (153 - 159 Series) When you can find them they are 32$CAN each. I'm asking $15. BTW. My Aleph 5 power supply was modelled after the following schematic: And finally the caps. These are 68,000uf/50V caps which means each bank in the picture below has 272,000uf or over half a farad for both. Per Kristijan's schematic they they are bypassed with a 4.7uF/600V film cap. Here's a pic of the bare cap: And here is a picture of the caps as they sit today. As you can see they are properly mounted via the correct capacitor clamps. For the right buyer I will cut these in half and sell them premounted and ready to go. Or sell it as one piece. I'm asking $50 per side or $100 for all eight+Bypass. Regards, Dan

18th May 2010, 05:12 PM	#4
Tea-Bag not politcally affiliated diyAudio Member Join Date: Feb 2006 Location: Kennebunk Blog Entries: 5	dan, use those caps in F5. At least half of it. __________________ DCB1/BiB Sign up Sheet Round #2 2012 CLICK HERE\|SSHV2 Shipping\| F5TConvertible Circuit Board Sign Up Sheet (Shipping)CLICK HERE\|Semisouth R100A/R085 available PM

18th May 2010, 06:14 PM	#6
Tea-Bag not politcally affiliated diyAudio Member Join Date: Feb 2006 Location: Kennebunk Blog Entries: 5	I hear you. I have'nt been able to stop myself for some time. __________________ DCB1/BiB Sign up Sheet Round #2 2012 CLICK HERE\|SSHV2 Shipping\| F5TConvertible Circuit Board Sign Up Sheet (Shipping)CLICK HERE\|Semisouth R100A/R085 available PM

18th May 2010, 11:43 PM	#7
Pocoyo diyAudio Member Join Date: Jan 2007 Location: Indonesia	Interested Plitron Hi DanT Dont sell the plitron to anybody i will take them together please email me your paypal address rgds, pocoyo Last edited by Pocoyo; 18th May 2010 at 11:45 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

18th May 2010, 02:20 PM	#2
thefragger diyAudio Member Join Date: Dec 2008 Location: Toronto, Canada	PM inbound...

18th May 2010, 04:55 PM	#3
dantwomey diyAudio Member Join Date: Feb 2002 Location: Canada	PM's responded to. Tentatively, capacitors and one toroid gone. Regards, Dan

19th May 2010, 04:42 PM	#9
dantwomey diyAudio Member Join Date: Feb 2002 Location: Canada	As far as I know all that's left is the chokes. Regards, Dan

19th May 2010, 09:53 PM	#10
Pocoyo diyAudio Member Join Date: Jan 2007 Location: Indonesia	Want to transfer PP Account ?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS Aleph Parts	bacworth	Swap Meet	10	8th July 2005 10:31 PM
FS: Aleph 3 Power supply parts, caps, toroid and heatsinks	vsr123	Swap Meet	4	20th March 2005 10:40 PM
FS: Complete Aleph P 1.7 parts / kit	acliao	Swap Meet	5	27th September 2004 02:38 AM
PARTS PARTS PARTS!!! Infocus Powerview 820, triplet, ballast, light, power supply!!!	marioinla	Swap Meet	1	31st August 2004 04:22 PM
fs aleph 5 parts 90% assembled	sriegel	Swap Meet	6	19th May 2002 10:36 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read