Dantimax Parts for CDPro2

korben69 · 9th May 2010, 08:59 PM

Dantimax Parts for CDPro2

Parts are described here :
Dantimax (elektronik) - Control_boards

LCD Display here :
http://electronics.dantimax.dk/Accessories/index.html

1 x Control2 CPU Board
1 x Control2 Display (LCD 2x16)
1 x Front Panel Type 1

PM me for details
All the PCB + parts : only 50€ shipped in Europe !
-> No separate selling - Paypal Only - Standard Shipping

korben69 · 14th August 2010, 08:04 PM

Up

AudioSeaWolf · 24th August 2010, 04:04 PM

Hi Corben,

There was also an old site (diy-high-end.com) that provided CD-Pro2LF modules, but its reputation was awful, because of parts not shipped, parts missing, no answer to e-mails, etc ...

However, it seems that there is now a new site (AudioCDPro) with much better prices than Dantimax for the CD-Pro2LF module.
They also sell tools to program your own user interface or complete control boards with VFD too.

Could be a good option...

Dagwood · 24th August 2010, 05:56 PM

Hi Korben69

Can you tell which of the (LCD 2x16) is on sale here?

Cheers

korben69 · 24th August 2010, 06:22 PM

Hi Dagwood
I think this is this one : LCD16x2BB - 16*2 display with blue LED backlight

korben69 · 24th August 2010, 06:25 PM

Quote:

Originally Posted by AudioSeaWolf

Hi Corben,

There was also an old site (diy-high-end.com) that provided CD-Pro2LF modules, but its reputation was awful, because of parts not shipped, parts missing, no answer to e-mails, etc ...

However, it seems that there is now a new site (AudioCDPro) with much better prices than Dantimax for the CD-Pro2LF module.
They also sell tools to program your own user interface or complete control boards with VFD too.

Could be a good option...

Thank you for your input

I've been recently advertised by mail for this new WEBShop site.
But I've changed my mind, too much projects...
I've got second hand CDM12 Industrial aside, but haven't tested it yet.
I hesitate to sell as I don't know if it works.

AudioSeaWolf · 25th August 2010, 07:14 AM

Hi Korben,

Indeed, the CDM12 Industrial Modules are quite old.
They were replaced by the CD-Pro modules in 1997 !

Hence, you might have a few problems related to the optical section.
After such a long time, the grease on the sledge bar might have gone wrong too, which could cause playability problems (wrong behavior of the actuator).

In case you get back into your CD Player project, best would be to get a brand new CD-Pro2LF module, or at least a CD-Pro2M generation (which is not RoHs but I do not think you care about it

)

korben69 · 25th August 2010, 08:37 AM

Absolutely right, CDM12 is quite a bit old, but who knows, maybe it works.
I'm considering to offer the CDM12 as a gift to the one who takes Dantimax Parts.
Shipping cost will be increased in this case

korben69 · 9th September 2010, 06:35 PM

Bump

Audioenthusiastic · 10th September 2010, 03:45 PM

Hi Guys,

I was desesperatly looking for a CD Pro for the maintenance of my YBA CD player (the repair shop wanted to charge me too much money!)

I compared the two websites mentioned above and Audiocdpro was a cheaper: I received my package in less than two days!

9th May 2010, 08:59 PM	#1
korben69 diyAudio Member Join Date: Nov 2006 Location: Near Lyon	Dantimax Parts for CDPro2 Dantimax Parts for CDPro2 Parts are described here : Dantimax (elektronik) - Control_boards LCD Display here : http://electronics.dantimax.dk/Accessories/index.html 1 x Control2 CPU Board 1 x Control2 Display (LCD 2x16) 1 x Front Panel Type 1 PM me for details All the PCB + parts : only 50€ shipped in Europe ! -> No separate selling - Paypal Only - Standard Shipping

24th August 2010, 05:56 PM	#4
Dagwood diyAudio Member Join Date: Feb 2010 Location: North of Auckland	Hi Korben69 Can you tell which of the (LCD 2x16) is on sale here? Cheers __________________ If you keep digging in the garden of failure you will eventually find success

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WELL...... Dantimax certainly isn't a scam !	Zen Mod	Swap Meet	0	27th November 2008 07:03 PM
Dantimax scam?	Kooka	Swap Meet	12	27th November 2008 06:30 PM
Dantimax scammer?	Kooka	Everything Else	4	25th November 2008 02:40 PM
dantimax rev3 help	Bengali	Everything Else	2	9th October 2008 09:47 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

14th August 2010, 08:04 PM	#2
korben69 diyAudio Member Join Date: Nov 2006 Location: Near Lyon	Up

24th August 2010, 04:04 PM	#3
AudioSeaWolf diyAudio Member Join Date: Aug 2010	Hi Corben, There was also an old site (diy-high-end.com) that provided CD-Pro2LF modules, but its reputation was awful, because of parts not shipped, parts missing, no answer to e-mails, etc ... However, it seems that there is now a new site (AudioCDPro) with much better prices than Dantimax for the CD-Pro2LF module. They also sell tools to program your own user interface or complete control boards with VFD too. Could be a good option...

24th August 2010, 06:22 PM	#5
korben69 diyAudio Member Join Date: Nov 2006 Location: Near Lyon	Hi Dagwood I think this is this one : LCD16x2BB - 16*2 display with blue LED backlight

25th August 2010, 07:14 AM	#7
AudioSeaWolf diyAudio Member Join Date: Aug 2010	Hi Korben, Indeed, the CDM12 Industrial Modules are quite old. They were replaced by the CD-Pro modules in 1997 ! Hence, you might have a few problems related to the optical section. After such a long time, the grease on the sledge bar might have gone wrong too, which could cause playability problems (wrong behavior of the actuator). In case you get back into your CD Player project, best would be to get a brand new CD-Pro2LF module, or at least a CD-Pro2M generation (which is not RoHs but I do not think you care about it )

25th August 2010, 08:37 AM	#8
korben69 diyAudio Member Join Date: Nov 2006 Location: Near Lyon	Absolutely right, CDM12 is quite a bit old, but who knows, maybe it works. I'm considering to offer the CDM12 as a gift to the one who takes Dantimax Parts. Shipping cost will be increased in this case

9th September 2010, 06:35 PM	#9
korben69 diyAudio Member Join Date: Nov 2006 Location: Near Lyon	Bump

10th September 2010, 03:45 PM	#10
Audioenthusiastic diyAudio Member Join Date: Jun 2010	Hi Guys, I was desesperatly looking for a CD Pro for the maintenance of my YBA CD player (the repair shop wanted to charge me too much money!) I compared the two websites mentioned above and Audiocdpro was a cheaper: I received my package in less than two days!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)