FS : Prototype PCB Specially Designed for Op-Amps

xtaltech · 28th April 2010, 12:41 AM

Hi Everyone,

I have some double-side, lead free, PCBs which are specially designed for SOIC-8 single and dual Op-Amps. On the component side there are 6 locations for filter (decoupling) capacitors. On the bottom side are ground (0 volt), +ve and -ve supply rails which run across the board. Along the +ve rail there are bare points that can be jointed directly to pin 7 or 8 (for single and dual op-amp respectively).

Please note that all the holes are 0.7 to 0.75mm in diameter.

Dimensions : 2.8" x 2.4" (74mm x 61mm)
Thickness : 1.6mm
Selling for USD2.50 each

Postage for the US 48 lower states is USD2.00 for ANY number you buy.
Buyers outside USA please email for shipping quote.
I only accept PayPal.

email xtaltech@yahoo.com

PH104 · 28th April 2010, 01:11 AM

look nice and perfect for a couple little projects I'm looking at. You have email.

thanks
Phil

xtaltech · 30th April 2010, 12:27 AM

To all my dear buyers,

Orders placed on or before April 29 have been shipped.

Worldwide airmail postage is only USD3.00 for ANY number you buy.

Thanks for your support.

PH104 · 1st May 2010, 06:28 PM

Hi xtaltech --

I got the boards and extra goodies today. Thanks very much for everything and the fast shipping. The foil pattern looks like it will be very handy.

Phil

xtaltech · 11th May 2010, 11:09 PM

Another lot of new boards arrived yesterday. All backordered items were shipped this morning. Sorry for the short delay.

There is still enough quantity to fulfill any order.

Shipping to USA lower 48 states is USD2.00 for any number of boards you buy.

Worldwide shipping is USD3.00 for any order size.

xtaltech · 28th October 2010, 09:27 AM

Greg,

The PCBs were sent by airmail this morning.

Please drop me line when you have received the package.

Also, you may post your feedback on the forum.

Kind regards,

xtaltech

28th April 2010, 12:41 AM	#1
xtaltech diyAudio Member Join Date: May 2004 Location: the Constitution State	FS : Prototype PCB Specially Designed for Op-Amps Hi Everyone, I have some double-side, lead free, PCBs which are specially designed for SOIC-8 single and dual Op-Amps. On the component side there are 6 locations for filter (decoupling) capacitors. On the bottom side are ground (0 volt), +ve and -ve supply rails which run across the board. Along the +ve rail there are bare points that can be jointed directly to pin 7 or 8 (for single and dual op-amp respectively). Please note that all the holes are 0.7 to 0.75mm in diameter. Dimensions : 2.8" x 2.4" (74mm x 61mm) Thickness : 1.6mm Selling for USD2.50 each Postage for the US 48 lower states is USD2.00 for ANY number you buy. Buyers outside USA please email for shipping quote. I only accept PayPal. email xtaltech@yahoo.com

28th April 2010, 01:11 AM	#2
PH104 diyAudio Member Join Date: Nov 2001 Location: New Mexico	look nice and perfect for a couple little projects I'm looking at. You have email. thanks Phil __________________ "When I read about the evils of drinking, I gave up reading." -- Henny Youngman

1st May 2010, 06:28 PM	#4
PH104 diyAudio Member Join Date: Nov 2001 Location: New Mexico	Hi xtaltech -- I got the boards and extra goodies today. Thanks very much for everything and the fast shipping. The foil pattern looks like it will be very handy. Phil __________________ "When I read about the evils of drinking, I gave up reading." -- Henny Youngman

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Burson Dual Op-amps & Audiocom S.regulators	fas948	Swap Meet	3	18th June 2010 11:25 AM
FS: four AD797BN op-amps(+browndog adapters)	leeperry	Swap Meet	13	1st February 2010 11:07 PM
FS OP-Amps BB/LT/NS; 9 Pin Tube Sockets; RCA Jack RFI Shields etc.	dtm1962	Swap Meet	8	15th January 2010 04:31 PM
TDA2500 - does anybody have a PCB designed?	Disney_SK	Class D	7	18th March 2008 01:28 PM
FS PA02 Power op-amps +/- 18v, 5 amps	modifry	Swap Meet	0	11th August 2004 07:45 PM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

30th April 2010, 12:27 AM	#3
xtaltech diyAudio Member Join Date: May 2004 Location: the Constitution State	To all my dear buyers, Orders placed on or before April 29 have been shipped. Worldwide airmail postage is only USD3.00 for ANY number you buy. Thanks for your support.

11th May 2010, 11:09 PM	#5
xtaltech diyAudio Member Join Date: May 2004 Location: the Constitution State	Another lot of new boards arrived yesterday. All backordered items were shipped this morning. Sorry for the short delay. There is still enough quantity to fulfill any order. Shipping to USA lower 48 states is USD2.00 for any number of boards you buy. Worldwide shipping is USD3.00 for any order size.

28th October 2010, 09:27 AM	#6
xtaltech diyAudio Member Join Date: May 2004 Location: the Constitution State	Greg, The PCBs were sent by airmail this morning. Please drop me line when you have received the package. Also, you may post your feedback on the forum. Kind regards, xtaltech

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read