FS: Very Nice Chassis (Hexateq)

PHilgeman · 19th February 2010, 08:14 PM

I am selling some lightly used amplifier chassis that I dont have a need for anymore.

They are very similar to this one here:

http://www.hexateq.com/_MG_4874.jpg

They are about 16.5" wide, 12" deep and 5 tall. They DO NOT have the extended feet that the picture shows. They have a single hole dead center on the front for a 'bulgin' style switch.

The rear of the enclosure has a cutout for an IEC-320 inlet with a built in switch. I can include this.

It also has holes for binding posts, RCA jacks, Panel mount XLR jacks and a small hole for a switch to switch between the two.

It is pre-drilled for UcD400 series amplifiers as well.

The build quality is excellent.

These cost about $400.00 new, I still have some use for them, but I will sell for $200.00. Shipping should be pretty cheap as they are all aluminum.

I have binding posts, bulgin switches, and input connectors to go with these if you are interested.

paul.hilgeman (at) us.ul.com

Thanks

jtktam · 19th February 2010, 11:45 PM

how many do you have? i will take a few

-joe

PHilgeman · 20th February 2010, 02:18 PM

Two.

Thanks,
Paul

qusp · 20th February 2010, 03:56 PM

arghh, I want one badly!!!

qusp · 20th February 2010, 03:56 PM

I just contacted them the other day about getting something custom, but its a touch out of my pricerange

qusp · 20th February 2010, 04:52 PM

oh well, please if they havent been bought already I would like to buy at least 1. I have emailed you to the address above already. thanks

jtktam · 20th February 2010, 10:20 PM

i will take both of them, cash in hand

-joe

john65b · 21st February 2010, 01:04 AM

Also interested in one, and LOCAL.

jtktam · 21st February 2010, 01:12 AM

Quote:

Originally Posted by john65b

Also interested in one, and LOCAL.

nice way to steal da deal

-joe

john65b · 21st February 2010, 01:16 AM

Jtktam -
Take a look at your email.
There is a deal for you.

I am behind you - you have first right of refusal.

19th February 2010, 08:14 PM	#1
PHilgeman diyAudio Member Join Date: Dec 2003 Location: Arlington Heights, IL	FS: Very Nice Chassis (Hexateq) I am selling some lightly used amplifier chassis that I dont have a need for anymore. They are very similar to this one here: http://www.hexateq.com/_MG_4874.jpg They are about 16.5" wide, 12" deep and 5 tall. They DO NOT have the extended feet that the picture shows. They have a single hole dead center on the front for a 'bulgin' style switch. The rear of the enclosure has a cutout for an IEC-320 inlet with a built in switch. I can include this. It also has holes for binding posts, RCA jacks, Panel mount XLR jacks and a small hole for a switch to switch between the two. It is pre-drilled for UcD400 series amplifiers as well. The build quality is excellent. These cost about $400.00 new, I still have some use for them, but I will sell for $200.00. Shipping should be pretty cheap as they are all aluminum. I have binding posts, bulgin switches, and input connectors to go with these if you are interested. paul.hilgeman (at) us.ul.com Thanks

21st February 2010, 01:04 AM	#8
john65b diyAudio Member Join Date: Jan 2005 Location: Chicago	Also interested in one, and LOCAL. __________________ "I speak Spanish to God, Italian to Women, French to Men, and German to my Horse" - Charles V

21st February 2010, 01:16 AM	#10
john65b diyAudio Member Join Date: Jan 2005 Location: Chicago	Jtktam - Take a look at your email. There is a deal for you. I am behind you - you have first right of refusal. __________________ "I speak Spanish to God, Italian to Women, French to Men, and German to my Horse" - Charles V

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pair Nice SET/300B Chassis	dshortt9	Swap Meet	0	17th January 2010 11:11 PM
UCD400AD amp in HEXATEQ Case	john65b	Swap Meet	1	26th January 2009 03:22 PM
Hexateq Case	orthoefer	Parts	0	5th June 2008 01:57 AM
Where to find a nice looking enclosure/chassis/case ???	bbaker6212	Class D	23	16th August 2006 05:13 AM
Nice stereo tube amp chassis	hpasternack	Swap Meet	0	11th November 2003 11:29 PM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

19th February 2010, 11:45 PM	#2
jtktam diyAudio Member Join Date: Apr 2009 Location: Toronto, Ontario, Canada Blog Entries: 17	how many do you have? i will take a few -joe

20th February 2010, 02:18 PM	#3
PHilgeman diyAudio Member Join Date: Dec 2003 Location: Arlington Heights, IL	Two. Thanks, Paul

20th February 2010, 03:56 PM	#4
qusp Sometimes a square peg fits a round hole just fine diyAudio Member Join Date: Oct 2009 Location: Brisbane, Australia	arghh, I want one badly!!!

20th February 2010, 04:52 PM	#6
qusp Sometimes a square peg fits a round hole just fine diyAudio Member Join Date: Oct 2009 Location: Brisbane, Australia	oh well, please if they havent been bought already I would like to buy at least 1. I have emailed you to the address above already. thanks

20th February 2010, 10:20 PM	#7
jtktam diyAudio Member Join Date: Apr 2009 Location: Toronto, Ontario, Canada Blog Entries: 17	i will take both of them, cash in hand -joe

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read