build your super LM3875 amp!

lanchile · 11th January 2010, 03:38 PM

Hello fellas! I have a lot staff to build an LM3875 amp:

four Mundorf 10000uf 63v they were soldered for test (two weeks)
four Panasonic FC 1500uf 50v "New"
four LM3875tf "new"
two LM3875 boards from audiosector "new"
two rectifier boards from Audiosector "new"
two full premium kit (stereo) for LM3875 includes, Mur860 (8) resistors "new"
two speakers posts (left,right channels) "new"
one Plitron transformer 300av 22vac x2 (used)
one alps 50k potentiometer "used"
two full LM3875 boards (audiosector) with four Black gates caps 1000uf 50v, LM3875tf, resistors etc instaled (used two weeks).
one big transformer came from a Portal panache integrated amp it is in good condition on front says tibi manufacturing 15-0121 rev.A Jackson Engineering co. Chatsworth. CA, and it is 45vac x2 secondaries and it has 110 x2 primaries.I do not know more about this transformer.
as you can see you just need a chassis and you will have a super amp.
Take all for $250 firm. you pay s/h from New York zip code 11385.
you can contact me at: lanchile007@yahoo.com

lanchile · 11th January 2010, 07:03 PM

Ok some items are gone already! so the price must go down!

four Panasonic FC 1500uf 50v "New"
four LM3875tf "new"
two LM3875 boards from audiosector "new"
two premium kit (stereo) for LM3875 includes,resistors "new"
two speakers posts (left,right channels) "new"
one Plitron transformer 300av 22vac x2 (used)
one alps 50k potentiometer "used"
two full LM3875 boards (audiosector) with four Black gates caps 1000uf 50v, LM3875tf, resistors etc instaled (used two weeks).
one transforme from an integrated Adcom amplifier 300va 35vac x2 used the wires for the secondaries are short about 1 1/2 inch long but I test them and they are working perfectly at 35vac and also I have a big transformer that came from a Portal panache integrated amp it is in good condition too on front says tibi manufacturing 15-0121 rev.A Jackson Engineering co. Chatsworth. CA, and it is 45vac x2 secondaries and it has 110 x2 primaries.I do not know more about this transformer.
as you can see you just need a chassis and you will have a super amp.
Take all for $150 firm. free s/h in the USA. if you pick them up I will give all for $100 cash.I live in New York,Queens 11385.
you can contact me at: lanchile007@yahoo.com

marginwalker · 16th January 2010, 03:03 PM

check your email

lanchile · 17th January 2010, 01:58 AM

ok some pictures of them!

lanchile · 17th January 2010, 02:04 AM

ok....take all of these goodies for $100.

marginwalker · 17th January 2010, 10:54 AM

YGM
I'll take all parts except transformers

The piltron maybe... it depends on shipping costs.

mattcalf · 7th April 2010, 02:41 AM

Anything still available?

lanchile · 7th April 2010, 02:53 AM

Quote:

Originally Posted by mattcalf

Anything still available?

Sorry, all was gone today for $100.

mattcalf · 7th April 2010, 03:19 AM

Bugger, unlucky.

Thanks for your time!

11th January 2010, 03:38 PM	#1
lanchile diyAudio Member Join Date: Sep 2008	build your super LM3875 amp! Hello fellas! I have a lot staff to build an LM3875 amp: four Mundorf 10000uf 63v they were soldered for test (two weeks) four Panasonic FC 1500uf 50v "New" four LM3875tf "new" two LM3875 boards from audiosector "new" two rectifier boards from Audiosector "new" two full premium kit (stereo) for LM3875 includes, Mur860 (8) resistors "new" two speakers posts (left,right channels) "new" one Plitron transformer 300av 22vac x2 (used) one alps 50k potentiometer "used" two full LM3875 boards (audiosector) with four Black gates caps 1000uf 50v, LM3875tf, resistors etc instaled (used two weeks). one big transformer came from a Portal panache integrated amp it is in good condition on front says tibi manufacturing 15-0121 rev.A Jackson Engineering co. Chatsworth. CA, and it is 45vac x2 secondaries and it has 110 x2 primaries.I do not know more about this transformer. as you can see you just need a chassis and you will have a super amp. Take all for $250 firm. you pay s/h from New York zip code 11385. you can contact me at: lanchile007@yahoo.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Audio Nirvana Super 15" cast frame build	mikeineugene	Full Range	10	16th October 2011 04:36 PM
Super Triode Connection Amplifier Build with 6BM8 and 6AK5	DerFly	Tubes / Valves	35	3rd November 2009 07:45 AM
Speaks build.... a few P.Daniel LM3875 monoblocks....	speakrsrfun	Chip Amps	5	13th March 2009 01:44 AM
Want to build Nuuk's original inverting LM3875 gainclone.	danielwritesbac	Chip Amps	28	3rd January 2009 10:43 PM
I was going to build my GC LM3875 but...	lanchile07	Chip Amps	4	23rd June 2008 01:15 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

11th January 2010, 07:03 PM	#2
lanchile diyAudio Member Join Date: Sep 2008	Ok some items are gone already! so the price must go down! four Panasonic FC 1500uf 50v "New" four LM3875tf "new" two LM3875 boards from audiosector "new" two premium kit (stereo) for LM3875 includes,resistors "new" two speakers posts (left,right channels) "new" one Plitron transformer 300av 22vac x2 (used) one alps 50k potentiometer "used" two full LM3875 boards (audiosector) with four Black gates caps 1000uf 50v, LM3875tf, resistors etc instaled (used two weeks). one transforme from an integrated Adcom amplifier 300va 35vac x2 used the wires for the secondaries are short about 1 1/2 inch long but I test them and they are working perfectly at 35vac and also I have a big transformer that came from a Portal panache integrated amp it is in good condition too on front says tibi manufacturing 15-0121 rev.A Jackson Engineering co. Chatsworth. CA, and it is 45vac x2 secondaries and it has 110 x2 primaries.I do not know more about this transformer. as you can see you just need a chassis and you will have a super amp. Take all for $150 firm. free s/h in the USA. if you pick them up I will give all for $100 cash.I live in New York,Queens 11385. you can contact me at: lanchile007@yahoo.com

16th January 2010, 03:03 PM	#3
marginwalker diyAudio Member Join Date: Apr 2006	check your email

17th January 2010, 10:54 AM	#6
marginwalker diyAudio Member Join Date: Apr 2006	YGM I'll take all parts except transformers The piltron maybe... it depends on shipping costs.

7th April 2010, 02:41 AM	#7
mattcalf diyAudio Member Join Date: May 2009	Anything still available?

7th April 2010, 03:19 AM	#9
mattcalf diyAudio Member Join Date: May 2009	Bugger, unlucky. Thanks for your time!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)