WTB: Krell KSA 50 PCB

Buhl · 29th December 2009, 05:19 PM

Looking for some pcbs for the ksa 50 - stuffed or including parts for the pcbs would be very nice - just the semiconductors would also be swell. No need for tranny, caps or heatsink as I have plenty.

If you are interrested in trading, I have following available:

2x Peter Daniel A30 PCB, incl. matched semiconductors and all resistors needed for the pcbs.

2x Zen V4 - assembled, just need to connect big mosfets (which I also have) and PSU and you are running. Also have 2x 47000uF/63 volt caps for the psu.

1x D1 I/V stage, incl. psu - assembled and tested (on perf board) - not using it as my DAC does not have high enough Iout.

Kind regards
Hans

john65b · 29th December 2009, 07:08 PM

I have a pair of Unused KSA-50 boards and 6 each of the Faichild Equivalents of the 2SA1943/2SC5200 (FJL4215/FJL4315).

Really, really looking for a Pass 1.7 Preamp PCB/Parts

Buhl · 30th December 2009, 11:00 AM

Quote:

Originally Posted by john65b

I have a pair of Unused KSA-50 boards and 6 each of the Faichild Equivalents of the 2SA1943/2SC5200 (FJL4215/FJL4315).

Really, really looking for a Pass 1.7 Preamp PCB/Parts

Hi John
Actually, I also have a P1.7 pcb incl. psu pcb from KK-pcb that I will probably never get to use. I also have all resistors, caps and all semiconductors - however, I am fixing another 1.7 for a buddy at the moment, so I am using these semis for spares - however - all semis are easy to get your hand on.

I have another offer on boards with all components except output resistors that I am thinking off - but I might get back to you. We can work out something with the P1.7 no matter how the other offer I have works out.

Which version of the KSA 50 boards are yours? Pinkmouse...etc.?

Kind regards
Hans

john65b · 30th December 2009, 11:40 AM

Wow, cosmic....
I have the pinkmouse boards

I have one ksa50 (or ksa100 due to highish bias) all complete and is my reference amp (excellent amp BTW) I also have another completed ksa50 board, but need to install into chassis and complete. Then I have the bare boards with semis I am looking to trade up for the P1.7

let me know

thanks

john65b · 30th December 2009, 01:58 PM

My "Pinky's" were fabbed 17/5/05

a.wayne · 31st December 2009, 08:17 PM

Here are some being sold on ebay .....

High Power Pure Class A amplifier PCB Krell KSA50 ! - eBay (item 320421135595 end time Jan-04-10 08:32:14 PST)

29th December 2009, 05:19 PM	#1
Buhl diyAudio Member Join Date: May 2002 Location: Aalborg, Denmark	WTB: Krell KSA 50 PCB Looking for some pcbs for the ksa 50 - stuffed or including parts for the pcbs would be very nice - just the semiconductors would also be swell. No need for tranny, caps or heatsink as I have plenty. If you are interrested in trading, I have following available: 2x Peter Daniel A30 PCB, incl. matched semiconductors and all resistors needed for the pcbs. 2x Zen V4 - assembled, just need to connect big mosfets (which I also have) and PSU and you are running. Also have 2x 47000uF/63 volt caps for the psu. 1x D1 I/V stage, incl. psu - assembled and tested (on perf board) - not using it as my DAC does not have high enough Iout. Kind regards Hans __________________ "Calculations? We don't need no stinkin calculations! We just make them really big!" Quote: Nelson Pass

29th December 2009, 07:08 PM	#2
john65b diyAudio Member Join Date: Jan 2005 Location: Chicago	I have a pair of Unused KSA-50 boards and 6 each of the Faichild Equivalents of the 2SA1943/2SC5200 (FJL4215/FJL4315). Really, really looking for a Pass 1.7 Preamp PCB/Parts __________________ "I speak Spanish to God, Italian to Women, French to Men, and German to my Horse" - Charles V

30th December 2009, 11:40 AM	#4
john65b diyAudio Member Join Date: Jan 2005 Location: Chicago	Wow, cosmic.... I have the pinkmouse boards I have one ksa50 (or ksa100 due to highish bias) all complete and is my reference amp (excellent amp BTW) I also have another completed ksa50 board, but need to install into chassis and complete. Then I have the bare boards with semis I am looking to trade up for the P1.7 let me know thanks __________________ "I speak Spanish to God, Italian to Women, French to Men, and German to my Horse" - Charles V

30th December 2009, 01:58 PM	#5
john65b diyAudio Member Join Date: Jan 2005 Location: Chicago	My "Pinky's" were fabbed 17/5/05 __________________ "I speak Spanish to God, Italian to Women, French to Men, and German to my Horse" - Charles V

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

31st December 2009, 08:17 PM	#6
a.wayne diyAudio Member Join Date: May 2008 Location: Front Row Center	Here are some being sold on ebay ..... High Power Pure Class A amplifier PCB Krell KSA50 ! - eBay (item 320421135595 end time Jan-04-10 08:32:14 PST)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Krell KSA 50 pcb	bra	Solid State	8355	19th March 2012 07:49 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read