(50) 12" custom Eminence woofers for sale

[davygrvy]

These woofers were custom made for a project that never made it to production and must go. They have the following T/S specs. All are new and unused in their original unopened boxes.

Re:   6.89 Ω
Le:   1.23 mH
Sd:   506.71 cm²
Vas:  165.55 Liters (5.85 ft³)
Fs:   29.94 Hz
Xmax: 9.8 mm
Pe:   225W (estimated)
Qms:  9.21
Qes:  0.44
Qts:  0.42
Bl:   13.53 T·m
Mms:  61.6 g
Mmd:  55.1 g
Cms:  4.591E-4 m/N
Rms:  1.2568 N·s/m
EBP:  68.7 (both sealed and ported are usable)

My loss is your gain. I would like $35 each plus shipping. These are not "subwoofers" per se. They were designed for use in a three-way system up to 800Hz are are quite efficient for that. They are good down to around 35Hz if you crunch the numbers in your favorite simulator. I have to work-out the UPS shipping costs and get the account ready. They will be leaving from zip 94805. I should have my act together early this next week.

Please take a few for Christmas gifts to your fellow DIYer.

 

[MJL21193]

Hi,
Is that Xmax peak or peak to peak?

 

[davygrvy]

peak (one way)

 

[MJL21193]

That changes things.

I'll snag 4 if you don't mind shipping to Canada and the cost of shipping is within reason.

 

[norman bates]

a single driver can be in a nearly max flat ported in 6ft3 with an f3 at tuning at 30hz.

Norman

 

[davygrvy]

That changes things.

I'll snag 4 if you don't mind shipping to Canada and the cost of shipping is within reason.

I don't mind at all... I'll get my act together Monday regarding shipping issues. Payment will be to paypal.

 

[MJL21193]

Very good, let me know on Monday.

 

[max426]

I will take 2 or 4, depending on shipping cost
jim

 

[davygrvy]

I will take 2 or 4, depending on shipping cost
jim

PM me your address for a total cost with shipping. Assuming Pittsburgh for 15201, 4 would cost 97.68+140=237.68 and two would be 48.84+70=118.84.

Shipping weight each is 15.45 lbs (14"x14"x7") and being sent from zip 94805

 

[MJL21193]

Santa is coming early for Johnny this year

Way to move it David!

 

[davygrvy]

42 left! Hurry before they are gone

 

[Bikeman]

Hi David,

Would you be willing to ship to Australia via USPS?
From memory, UPS screwed me with unnecessary "customs clearance" charges..

Also, is the driver ventilated under the spider?

Cheers,
Mark

 

[davygrvy]

PM me your address and I'll give it a try at the local post office tomorrow for a quote. How many would you like? There is a vent in the rear for the back of the dustcover. I know nothing more.

 

[badman]

Howzabout some curves, big guy?

 

[davygrvy]

I don't have any infinite baffle ones (or any others) sorry. I could get you more T/S params generated by MLSSA if you really want it.

 

[Shaun]

email sent

 

[davygrvy]

I don't have any infinite baffle ones (or any others) sorry. I could get you more T/S params generated by MLSSA if you really want it.

I'd have to make a new jig for the test wall and honestly don't feel like doing the work.

 

[east electronics]

i dlike to have 6 .... give me some time to find out shiping cost ...

there is a forum member that is supposed to give me some money by he is located in hawai .... so the idea is instead of he is senting money to me he is senting the woofers ...

will see

 

[davygrvy]

I'm perfectly okay with someone buying and sending to you. But international shipping can be a bit tricky as I'm learning. Any customs taxes will be payable by the receiver on delivery. I don't mind filling out some forms on my end.

I won't send to Italy as "lost" items are the norm.

 

[gabrittain]

Dave I'll take 2

Gene