Acoustic Research 6 inch woofer
PE Advert:
Specifications: *Power handling: 80 watts RMS/120 watts max *VCdia: 1-3/8" *Le: .17 mH *Impedance: 4 ohms *Re: 3.0 ohms *Frequency range: 40-4,500 Hz *Fs: 40 Hz *SPL: 89 dB 1W/1m *Vas: 1.13 cu. ft. *Qms: 2.87 *Qes: .47 *Qts: .40 *Xmax: 4 mm *Dimensions: Overall diameter: 6-5/8", Cutout diameter: 5-3/4", Mounting depth: 3-3/4".
Cosmetic cast frame
One piece aluminum cone
Magnetically shielded magnet structure
1-3/8" 4-ohm voice coil
Rubber surround
Aluminum former
MEASUREMENTS DONE BY MENISCUS
$20.00 pair (CAD) New in box 16 available
These were purchased for a friend who wanted them for a project but has since been laid off and don't think he will use them. I also purchased some for myself and built an MTM with the North tweeter.
North Tweeters:
$25.00 Pair (new in box) with heavy duty faceplate available. SOME HAVE FACEPLATE ATTACHED AS IN PIC.
Location: L4n 1L9 Ontario, Canada
PE Advert:
Specifications: *Power handling: 80 watts RMS/120 watts max *VCdia: 1-3/8" *Le: .17 mH *Impedance: 4 ohms *Re: 3.0 ohms *Frequency range: 40-4,500 Hz *Fs: 40 Hz *SPL: 89 dB 1W/1m *Vas: 1.13 cu. ft. *Qms: 2.87 *Qes: .47 *Qts: .40 *Xmax: 4 mm *Dimensions: Overall diameter: 6-5/8", Cutout diameter: 5-3/4", Mounting depth: 3-3/4".
Cosmetic cast frame
One piece aluminum cone
Magnetically shielded magnet structure
1-3/8" 4-ohm voice coil
Rubber surround
Aluminum former
MEASUREMENTS DONE BY MENISCUS
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
$20.00 pair (CAD) New in box 16 available
These were purchased for a friend who wanted them for a project but has since been laid off and don't think he will use them. I also purchased some for myself and built an MTM with the North tweeter.
North Tweeters:
$25.00 Pair (new in box) with heavy duty faceplate available. SOME HAVE FACEPLATE ATTACHED AS IN PIC.
An externally hosted image should be here but it was not working when we last tested it.
Location: L4n 1L9 Ontario, Canada
It looks like the North Tweets are sold.
The AR's are still available.
Serenade by Wolf
Daarse by Wolf Built by Ryan
An MTM using the North Tweeter built by me.
The AR's are still available.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
Serenade by Wolf
An externally hosted image should be here but it was not working when we last tested it.
Daarse by Wolf Built by Ryan
An externally hosted image should be here but it was not working when we last tested it.
An MTM using the North Tweeter built by me.
An externally hosted image should be here but it was not working when we last tested it.
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.