cheap high end toroids for e.g. FirstWatt-clones

h_a · 18th November 2009, 09:39 AM

A lucky circumstance allows me to sell 2x custom made, made in germany toroids with electrostatic shield and magnetic shielding and potted center holes.

They have 230 V primaries and 2x 18VAC secondaries (centertapped), so suitable for amps with +25/0/-25V rails. They are 180VA each, so nicely suitable for a dual mono power supply where each channel has its own toroid. They also have 2x 30VAC auxilary windings (can be used for frontends, dc-protection...).

Comparable quality toroids cost about 50 Euros per piece, I sell them for 22 Euros per piece or both together for 40 Euros.

Have fun, Hannes

PS: they are high efficiency types, so they may humm slightly.

sivan_and · 18th November 2009, 10:00 AM

Quote:

PS: they are high efficiency types, so they may humm slightly.

no aware that high efficiency types will hum....

h_a · 18th November 2009, 03:21 PM

Photo!

@sivan_and: with that I meant these are not reduced induction types.

woodturner-fran · 19th November 2009, 01:18 AM

I'm interested, but what about shipping to Ireland. Might make it prohibitively expensive?

Fran

h_a · 19th November 2009, 09:00 AM

Hi Fran, you got a pm!

woodturner-fran · 19th November 2009, 10:57 AM

And a PM back to you too.....

Fran

18th November 2009, 09:39 AM	#1
h_a diyAudio Member Join Date: Sep 2006 Location: Graz, Austria	cheap high end toroids for e.g. FirstWatt-clones A lucky circumstance allows me to sell 2x custom made, made in germany toroids with electrostatic shield and magnetic shielding and potted center holes. They have 230 V primaries and 2x 18VAC secondaries (centertapped), so suitable for amps with +25/0/-25V rails. They are 180VA each, so nicely suitable for a dual mono power supply where each channel has its own toroid. They also have 2x 30VAC auxilary windings (can be used for frontends, dc-protection...). Comparable quality toroids cost about 50 Euros per piece, I sell them for 22 Euros per piece or both together for 40 Euros. Have fun, Hannes PS: they are high efficiency types, so they may humm slightly.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sub/amp High End----cheap	Dominick22	Swap Meet	0	23rd August 2005 08:48 AM
high performance but cheap amp	rulezzz	Solid State	7	15th May 2004 04:30 PM
High power toroids source	Lupulroz	Swap Meet	10	30th July 2003 03:38 PM
efficiency of high power toroids at low load?	capslock	Parts	8	24th April 2002 11:26 PM
2KVA Toroids, Caps, Pots cheap	dshortt9	Solid State	1	9th May 2001 06:11 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

19th November 2009, 01:18 AM	#4
woodturner-fran diyAudio Member Join Date: Jan 2006 Location: Ireland	I'm interested, but what about shipping to Ireland. Might make it prohibitively expensive? Fran

19th November 2009, 09:00 AM	#5
h_a diyAudio Member Join Date: Sep 2006 Location: Graz, Austria	Hi Fran, you got a pm!

19th November 2009, 10:57 AM	#6
woodturner-fran diyAudio Member Join Date: Jan 2006 Location: Ireland	And a PM back to you too..... Fran

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)