FS: Hafler P500 DIY project

bongolijus · 5th November 2009, 07:31 AM

Hi there,

I have doing this beast for a whole months for my studio speakers, but accidently I have good chance to buy Bryston amp and this sounds very well with my PMCs. So I have this project for sale. What's include in this project:

1. Hafler Pro 500 PC-68A Amplifier BOARD with stuffed mostly with all components, except mising few resistors, 3 capacitors and one transistor. It's easy to find parts. Other all parts are soldered in. All wima polyester and polypropylene caps, mostly all metal oxide resistor 1%, Panasonic FC caps, Ceramic and metal oxide output resistors.

2. Jantzen 1.4mH air core inductors.

3. Set of Hitachi NOS Output Mosfet transistors. 6 x 2SJ56 and 6 x 2SK176

4. Big Antek 80V / 40V 800VA Toroidal Power Transformer.
Labeled input 115 + 115 Vac (Dual coils), outputs 40Vac x 2 (dual coils) at 10A each, 12Vac at 2A and 18V at 2A.

5. 6 x Panasonic GAA 10000uF 100V capacitors, so totaly 60000uF.

6. Omron speaker protection relay.
Digi-Key - Z250-ND (Manufacturer - MJN2CE-DC24)

It's almost all parts to finish the project. Just mises case, connectors and etc.

Make an offer.

Best regards,
Justas

apocalypseon · 5th November 2009, 08:54 AM

How much are u expecting?

bongolijus · 5th November 2009, 09:42 AM

In all the best, to bring back money what I have paid

I can write You prices I have paid:

1. The blank PCB cost me - 18$ and the parts around - 60$.
2. 2 x Jantzen inductors - 20$
3. The 12 Mosfets - 119$
4. Toroidal transformer - 89$
5. 6 x Panasonic Caps - 70$
6. Omron relay - 15$

So totaly without shiping this cost me around 390$.

bongolijus · 8th November 2009, 10:53 AM

Bump!

apocalypseon · 9th November 2009, 09:43 AM

Oh, sorry for not replying bongo, I didn't get a notification. I don't have that kind of money.

bongolijus · 12th November 2009, 05:12 PM

Ah, and I forgot, I'll include the papers of this project: schematics, BOM and so on.

5th November 2009, 07:31 AM	#1
bongolijus diyAudio Member Join Date: Oct 2009	FS: Hafler P500 DIY project Hi there, I have doing this beast for a whole months for my studio speakers, but accidently I have good chance to buy Bryston amp and this sounds very well with my PMCs. So I have this project for sale. What's include in this project: 1. Hafler Pro 500 PC-68A Amplifier BOARD with stuffed mostly with all components, except mising few resistors, 3 capacitors and one transistor. It's easy to find parts. Other all parts are soldered in. All wima polyester and polypropylene caps, mostly all metal oxide resistor 1%, Panasonic FC caps, Ceramic and metal oxide output resistors. 2. Jantzen 1.4mH air core inductors. 3. Set of Hitachi NOS Output Mosfet transistors. 6 x 2SJ56 and 6 x 2SK176 4. Big Antek 80V / 40V 800VA Toroidal Power Transformer. Labeled input 115 + 115 Vac (Dual coils), outputs 40Vac x 2 (dual coils) at 10A each, 12Vac at 2A and 18V at 2A. 5. 6 x Panasonic GAA 10000uF 100V capacitors, so totaly 60000uF. 6. Omron speaker protection relay. Digi-Key - Z250-ND (Manufacturer - MJN2CE-DC24) It's almost all parts to finish the project. Just mises case, connectors and etc. Make an offer. Best regards, Justas

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hafler P500 - One channel quieter than the other	Pippi Lindenstroem	Solid State	5	14th October 2009 08:44 PM
Hafler P500	bkfix	Solid State	0	30th March 2009 01:19 AM
Hafler P500, need schematic, manual, and some help	still4given	Solid State	25	29th December 2007 07:17 AM
hafler p500	rogerb	Solid State	1	12th May 2007 03:30 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

5th November 2009, 08:54 AM	#2
apocalypseon diyAudio Member Join Date: Sep 2009	How much are u expecting?

5th November 2009, 09:42 AM	#3
bongolijus diyAudio Member Join Date: Oct 2009	In all the best, to bring back money what I have paid I can write You prices I have paid: 1. The blank PCB cost me - 18$ and the parts around - 60$. 2. 2 x Jantzen inductors - 20$ 3. The 12 Mosfets - 119$ 4. Toroidal transformer - 89$ 5. 6 x Panasonic Caps - 70$ 6. Omron relay - 15$ So totaly without shiping this cost me around 390$.

8th November 2009, 10:53 AM	#4
bongolijus diyAudio Member Join Date: Oct 2009	Bump!

9th November 2009, 09:43 AM	#5
apocalypseon diyAudio Member Join Date: Sep 2009	Oh, sorry for not replying bongo, I didn't get a notification. I don't have that kind of money.

12th November 2009, 05:12 PM	#6
bongolijus diyAudio Member Join Date: Oct 2009	Ah, and I forgot, I'll include the papers of this project: schematics, BOM and so on.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)