FS Morel drivers, custom CNC machined aluminum cabinets, Dayton cabinets
Pair Morel HU9.1 driver $195 pair
Single Morel MDM-55 driver $70 ($89.49 at Parts Express)
Parts-Express.com:*Morel MDM 55 2-1/8" Soft Dome Midrange | morel mdm-55 midrange soft dome tweeter silk dome textile dome fabric dome 20OffMorel070109
Pair Morel MDT-44 driver $125 pair
Specs for MDT-40 (similar to MDT-44): http://www.morelhifi.com/products/pdf/mdt%2040.pdf
Pair custom CNC milled aluminum mid/tweeter housing to mount Morel MDM-55 and MDT-44 in time alignment. $50 pair (cost $200)
Some light scratches in aluminum
Pair Dayton TW-0.75BK 0.75 ft³ 2-Way Cabinet Gloss Black
$100 pair ($107.69 each at Parts Express)
Parts-Express.com:*Dayton TW-0.75BK 0.75 ftÂ³ 2-Way Cabinet Gloss Black | speaker cabinet empty speaker cabinet unloaded speaker unloaded cabinet .75 cubic foot enclosure
Specs: Parts-Express.com:*Dayton TW-0.75BK 0.75 ftÂ³ 2-Way Cabinet Gloss Black | speaker cabinet empty speaker cabinet unloaded speaker unloaded cabinet .75 cubic foot enclosure
Baffle cut outs near top of cabinet accept Morel HU9.1 drivers. Some scuffs and scratches in cabinet finish. 3 small holes (aprox 3/32”) have been drilled thru top of each cabinet to facilitate wiring leads to driver (from external crossover placed behind custom CNC milled aluminum mid/tweeter housing). There exist 2 more spots on top of one cabinet where small holes were started (but not completed). Baffles have been glued solid to cabinets. Cabinets are stuffed with acoustical fill. These cabinets are an ideal match for the Morel HU9.1 drivers providing Butterworth alignment Qtc = .707 in an acoustically suspended environment.
All drivers reportedly are working correctly (bought from a very honest and helpful DIYer). Drivers previously utilized in these cabinets in a time aligned (first order crossover) system as part of a 4-way system (pair of 15” active subs). All one needs to assemble this exceptional system (as a three way) is one more Morel MDM-55 driver, inductors, capacitors, some wire, maybe a resistor (start with L pad), and binding posts (alternatively one can run cables direct to amplifiers for improved performance). I am second owner of this system. Once built with quality crossover and wiring this system is reportedly exceptionally fast, dynamic and tonally well balanced. I can provide necessary crossover data to buyer. I acquired system with hopes of replacing my Apogee Duetta Signatures (fitted with new XLM2 ribbons) with it. Unfortunately I have need for money and must now liquidate.
Package deal if buying all $405 (save $135 off of $540)
Sale preference to selling Morel HU9.1 with the Dayton cabinets and selling Morel MDM-55 and Morel MDT-44 with the custom CNC aluminum cabinets.
Pair Morel MDT-44 driver + single Morel MDM-55 shipped in a 9”x9”x9” box weighing 1.8lb
Pair custom CNC milled aluminum mid/tweeter housing shipped in a 11”x11”x11” box weighing 11.8lb
pair Morel HU9.1 drivers shipped mounted in pair Dayton TW-0.75BK 0.75 ft³ 2-Way Cabinet (Gloss Black) in 2 separate 22”x18”x15” factory packaging boxes weighing 26lb each.
Don’t ask me for a shipping quote as you can get your own on line with your shipper of choice. Both FedEx and UPS are conveniently located to me. I am shipping from Bozeman MT 59715
To give those located far away from me an idea of shipping charges I paid $87.50 total for (fully insured) FedEx ground shipping charges to ship all of above to Bozeman MT 59715 from Lawrenceville GA 30043
disregard paragraph below as ad is also posted on Craigslist
Please reply with your phone number and preferred hours of contact (so that I know you are not just a bot looking to add to a mailing list for spam or other malicious purpose).
Alternatively you can call me at: (for 0 six) five ate 0 - 6 threeee 7 for (10am-9pm MST 7 days).
Read my feedback:
Bayneophyte on http://.www.eBay.com
Audio_gon_neophyte on http://.www.Audiogon.com
more photos available
Package deal: everything for $310 + shipping (save $70 off the $380 discounted separate pricing)
Pair Morel HU9.1 driver $160 pair
Single Morel MDM-55 driver $50 ($89.49 at Parts Express)
Pair Morel MDT-44 driver $50 pair
Pair custom CNC milled aluminum mid/tweeter housing to mount Morel MDM-55 and MDT-44 in time alignment. $40 pair see notes in original post
Pair Dayton TW-0.75BK 0.75 ft³ 2-Way Cabinet Gloss Black $80 pair ($107.69 each at Parts Express) see notes in original post
Hi, I WTB pair of MDT44. :o)
Please see PM for details.
You got email....
Diyaudio.com does not notify me of PM’s received and I have yet to discover how to have site forward them to my email. Please use “send email to Bronson_k” function of site and post interest in this thread (to spare others investing time inquiring on what you already intend to purchase).
PM and email responded to. Consider Pair Morel MDT-44 drivers and pair custom CNC machined aluminum cabinets sale pending.
While I have a strong preference for USPS money order payments I can also accept funds via PayPal or personal check. Items shipped within 48 hours if USPS money order or PayPal payment (likely same or next day shipment dispatch). If payment via personal and or business check I will typically wait 5 business days prior to shipping (time enough for check to clear senders bank).
Pair Morel MDT-44 drivers still available (as is everything excepting the CNC milled aluminum cabinets)
Following Sold: aluminum CNC milled cabinets, pair Morel MDT-44 drivers, Morel MDM-55 driver
Following still available: Dayton cabinets and pair Morel HU9.1 drivers
|All times are GMT. The time now is 09:35 PM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
Copyright ©1999-2015 diyAudio