Conrad MF35-151.5 milled/drilled/tapped heatsinks - diyAudio
Go Back   Home > Forums > Commercial Sector > Swap Meet

Swap Meet Sell your stuff here, who knows, some other fanatic might be interested!

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 29th September 2009, 09:17 PM   #1
cwujek is offline cwujek  United States
diyAudio Member
 
cwujek's Avatar
 
Join Date: May 2007
Location: Seattle, WA
Default Conrad MF35-151.5 milled/drilled/tapped heatsinks

I have 40 pairs of Conrad MF35-151.5 heatsinks up for sale. All have been milled, drilled and tapped as shown in the attached drawing. Bolts will be included as well, which are black and are shown here:

http://www.mcmaster.com/library/1/10...91239A144L.GIF
http://www.mcmaster.com/library/1/10...91239A319L.GIF

Flat packs were in the making, but will not be ready for another few weeks. I have included a quick picture of the material I am using for the tops and bottom. The fronts and backs will be 1/4 inch aluminum. I cannot ship both heatsinks and flat packs at the same time, it would require a large box, lots of packaging material, and more labor. I will be making shipping runs regularly via UPS, and am willing to ship internationally if needed. $135 shipped anywhere in the US per pair. Two pairs $260 shipped. Three for $380 shipped. Four pairs for $490 shipped. Email if interested.

Chris
Attached Images
File Type: jpg IMG_2067.JPG (125.6 KB, 1523 views)
File Type: jpg heatsink-1.jpg (108.6 KB, 1471 views)

Last edited by cwujek; 29th September 2009 at 09:30 PM.
  Reply With Quote
Old 29th September 2009, 10:45 PM   #2
cwujek is offline cwujek  United States
diyAudio Member
 
cwujek's Avatar
 
Join Date: May 2007
Location: Seattle, WA
9 pairs sold, 31 pairs left.
  Reply With Quote
Old 30th September 2009, 01:32 PM   #3
Westley is offline Westley  United States
diyAudio Member
 
Join Date: Mar 2007
I will buy three pair. Email me your address or PayPal for payment.
Thanks.
  Reply With Quote
Old 30th September 2009, 03:57 PM   #4
1MOR is offline 1MOR  United States
diyAudio Member
 
Join Date: Jul 2008
I would like one pair of heatsinks and one chassis flatpack. Email sent!
  Reply With Quote
Old 30th September 2009, 06:09 PM   #5
diyAudio Member
 
merlin2069er's Avatar
 
Join Date: Sep 2008
Location: Toronto
Blog Entries: 1
Send a message via MSN to merlin2069er
I'm interested too. I think I could use one for my PASS LABS F5?
(can anyone verify if this is the case)


I would like one pair of heatsinks and one chassis flatpack.
(I could use a price too - before I order)
  Reply With Quote
Old 30th September 2009, 07:56 PM   #6
diyAudio Member
 
Join Date: Dec 2004
Location: Sacramento, CA
Default What is this flat pack you speak of?

Hello,
I'm sorry but could someone tell me what a flat pack is? Heat sinks I know, flat packs, I don't. And prices too, please.
Thanks,
David
  Reply With Quote
Old 1st October 2009, 01:00 AM   #7
Tea-Bag is offline Tea-Bag  United States
not politcally affiliated
diyAudio Member
 
Tea-Bag's Avatar
 
Join Date: Feb 2006
Location: Kennebunk
Blog Entries: 7
Quote:
Originally Posted by merlin2069er View Post
I'm interested too. I think I could use one for my PASS LABS F5?
(can anyone verify if this is the case)



(I could use a price too - before I order)
This is more than enough for F5.
I have a pair of the first batch of cwjek's milled and tapped conrads.
Very nice. makes chassis building easier.
__________________
Salas Boards 2014 #2 SHIPPED |F5TC board and power supplies available PM | Hot-Rod DCB1 boards and kits available PM |Mesmerize kits available (no boards)
  Reply With Quote
Old 1st October 2009, 01:02 AM   #8
Tea-Bag is offline Tea-Bag  United States
not politcally affiliated
diyAudio Member
 
Tea-Bag's Avatar
 
Join Date: Feb 2006
Location: Kennebunk
Blog Entries: 7
Quote:
Originally Posted by TerribleT View Post
Hello,
I'm sorry but could someone tell me what a flat pack is? Heat sinks I know, flat packs, I don't. And prices too, please.
Thanks,
David
probably aluminum sheet metal. The grill looking stuff on pic up top. Use it to make rest of chassis.
Just need a drill and tap set then.
__________________
Salas Boards 2014 #2 SHIPPED |F5TC board and power supplies available PM | Hot-Rod DCB1 boards and kits available PM |Mesmerize kits available (no boards)

Last edited by Tea-Bag; 1st October 2009 at 01:11 AM.
  Reply With Quote
Old 1st October 2009, 05:17 AM   #9
fritz39 is offline fritz39  United States
diyAudio Member
 
Join Date: Mar 2008
Location: Maple Valley, WA
I'm in for two. Email sent.
  Reply With Quote
Old 1st October 2009, 06:59 AM   #10
cwujek is offline cwujek  United States
diyAudio Member
 
cwujek's Avatar
 
Join Date: May 2007
Location: Seattle, WA
There seems to be some confusion regarding what the flatpacks are and if they are included. The flat packs are NOT included in the price, but they will be available for sale within the next few weeks. I'm aiming for around $30 for the 1/8 inch perforated top and bottom, and another $30 for a solid 1/4" to 1/2" front and back. Both will be drilled to fit the heatsinks perfectly. All you will need to do is put it together with a set of allen keys.

You may ask why I don't wait 3 weeks and ship the flat packs and heat sinks together. I already have packing supplies to fit the heatsinks perfectly, and shipping them together would require much bigger boxes that could contain the larger flat packs. It is much easier for me to do things this way, although for international orders wanting both I'll look into the possibility of shipping both together.

Quote:
Originally Posted by Tea-Bag View Post
probably aluminum sheet metal. The grill looking stuff on pic up top. Use it to make rest of chassis.
Just need a drill and tap set then.
The heatsinks have already been drilled and tapped. The flatpacks will include predrilled mounting holes, only tool required to assemble will be an a set of allen keys. I'm also looking to possibly square punch the rear panels for the IEC terminal, so only simple round holes will be the users responsibility. Please let me know if you have any more questions, I will try to respond within 24 hours.

Chris
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Milled/Drilled/Tapped Conrad Heatsinks v2 + Flat packs cwujek Group Buys 30 30th September 2009 06:48 AM
WBT Conrad MF35-151.5 nicoch58 Swap Meet 1 4th August 2009 09:34 AM
Conrad Heatsinks MF35-151.5's for sale or trade Tea-Bag Swap Meet 4 3rd June 2009 02:27 AM
Conrad drilled/milled/tapped heat sinks for sale cwujek Swap Meet 0 22nd April 2009 10:50 AM


New To Site? Need Help?

All times are GMT. The time now is 10:44 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2