• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Van Alstine Mosfet 150 Modified Dynaco ST 150 Power Amp

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
An externally hosted image should be here but it was not working when we last tested it.


$135.00 Van Alstine Mosfet 150 Modified Dynaco ST 150 Power Amp Approximately 75W / channel.
This is a great sounding power amplifier for the price.

The poor sounding electrolytic input capacitors have been replaced with better sounding 15 uF Mylar film capacitors.

This limits sets the low frewquency -3dB point at 0.4 HZ which is more than adequate.

30 Amp binding terminals have replaced the crappy stock speaker terminals.

The input jacks have been replaced with Switchcraft and they have been spaced further apart to accommodate larger phono connectors.

Shipping is ACTUAL Cost, NO Handling or packing fees. Shipping weight is 30 lbs from 55112.

PayPal is only accepted from verified accounts with verified shipping addresses.

I will only ship to the address listed with PayPal.

No returns for cosmetic reasons. Look a the photos before you buy.

An externally hosted image should be here but it was not working when we last tested it.


An externally hosted image should be here but it was not working when we last tested it.


An externally hosted image should be here but it was not working when we last tested it.


An externally hosted image should be here but it was not working when we last tested it.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.