Diytube ST35 rev d

whitelabrat · 31st July 2009, 04:27 PM

For sale:

One DIYTube ST35 (based on Dynaco ST35) stuffed PCB and audio tubes:

You can see it here.
http://www.diytube.com/phpBB2/viewto...=2694&start=15

No transformers or chassis included. I've rewired the board for solid state rectification.

whitelabrat · 13th October 2009, 02:16 PM

Anyone? Anyone? $100 or best offer?

For an extra $30 I'll include a pair of Edcor XPP 15w transformers.

I've also got an uncut metal plate you can mount everything on. You'll have to supply your own power transformer. I'll also include a 8 pin socket and a 5u4gb tube if you want that.

limono · 14th October 2009, 12:07 AM

How big is that board and what parts did you use?

whitelabrat · 14th October 2009, 01:43 AM

You can get all the specs at diytube.com where you can download the manual.

I used the BOM that was posted except I used 716P orange drop capacitors and I have the power supply ready for a tube rectifier. Good quality parts.

I can give more detail later if needed.

bigjppop · 14th October 2009, 11:13 PM

Email sent.

whitelabrat · 28th May 2010, 02:02 AM

Board is still for sale. No tubes. Just the board. $50 + shipping.

Ty_Bower · 28th May 2010, 02:44 AM

The price is more than fair - the bare board costs what you are asking for it fully populated. Your craftsmanship appears good too. Is that a Rev C, or a Rev D?

edit - dumb me, should read the title. Is the XPP offer still valid?

whitelabrat · 28th May 2010, 03:14 PM

That's a Rev D. I've already sold off the tubes and transformers. This has sat around for a couple years, and I don't see using it ever so it's gotta go.

I just can justify paying $40 for a set of EL84's when I've got about 200 possible output tubes in my closet. I should change my name to PackRat.

whitelabrat · 28th May 2010, 08:36 PM

Sold! Thanks for looking.

31st July 2009, 04:27 PM	#1
whitelabrat diyAudio Member Join Date: Dec 2006 Location: Maryland	Diytube ST35 rev d For sale: One DIYTube ST35 (based on Dynaco ST35) stuffed PCB and audio tubes: You can see it here. http://www.diytube.com/phpBB2/viewto...=2694&start=15 No transformers or chassis included. I've rewired the board for solid state rectification.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dynaco ST35 boards	manonon	Tubes / Valves	0	22nd February 2009 08:45 PM
big doubt: dynakit st35 VS diytube st35clone	leitmo	Tubes / Valves	4	20th June 2008 02:54 AM
FS DIYtube ST-35 parts kit	Jed	Swap Meet	2	8th January 2007 03:28 PM
Dynaco ST35	sds2000	Tubes / Valves	31	4th January 2007 04:06 AM
www.diytube.com Kits	Coulomb	Tubes / Valves	22	6th February 2005 03:32 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

13th October 2009, 02:16 PM	#2
whitelabrat diyAudio Member Join Date: Dec 2006 Location: Maryland	Anyone? Anyone? $100 or best offer? For an extra $30 I'll include a pair of Edcor XPP 15w transformers. I've also got an uncut metal plate you can mount everything on. You'll have to supply your own power transformer. I'll also include a 8 pin socket and a 5u4gb tube if you want that.

14th October 2009, 12:07 AM	#3
limono diyAudio Member Join Date: Mar 2007	How big is that board and what parts did you use?

14th October 2009, 01:43 AM	#4
whitelabrat diyAudio Member Join Date: Dec 2006 Location: Maryland	You can get all the specs at diytube.com where you can download the manual. I used the BOM that was posted except I used 716P orange drop capacitors and I have the power supply ready for a tube rectifier. Good quality parts. I can give more detail later if needed.

14th October 2009, 11:13 PM	#5
bigjppop diyAudio Member Join Date: Jun 2009 Location: Berlin	Email sent.

28th May 2010, 02:44 AM	#7
Ty_Bower diyAudio Member Join Date: Mar 2007 Location: Newark, DE	The price is more than fair - the bare board costs what you are asking for it fully populated. Your craftsmanship appears good too. Is that a Rev C, or a Rev D? edit - dumb me, should read the title. Is the XPP offer still valid?

28th May 2010, 03:14 PM	#8
whitelabrat diyAudio Member Join Date: Dec 2006 Location: Maryland	That's a Rev D. I've already sold off the tubes and transformers. This has sat around for a couple years, and I don't see using it ever so it's gotta go. I just can justify paying $40 for a set of EL84's when I've got about 200 possible output tubes in my closet. I should change my name to PackRat.

28th May 2010, 08:36 PM	#9
whitelabrat diyAudio Member Join Date: Dec 2006 Location: Maryland	Sold! Thanks for looking.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)