For sale:
One DIYTube ST35 (based on Dynaco ST35) stuffed PCB and audio tubes:
You can see it here.
http://www.diytube.com/phpBB2/viewtopic.php?t=2694&start=15
No transformers or chassis included. I've rewired the board for solid state rectification.
One DIYTube ST35 (based on Dynaco ST35) stuffed PCB and audio tubes:
You can see it here.
http://www.diytube.com/phpBB2/viewtopic.php?t=2694&start=15
No transformers or chassis included. I've rewired the board for solid state rectification.
Anyone? Anyone? $100 or best offer?
For an extra $30 I'll include a pair of Edcor XPP 15w transformers.
I've also got an uncut metal plate you can mount everything on. You'll have to supply your own power transformer. I'll also include a 8 pin socket and a 5u4gb tube if you want that.
For an extra $30 I'll include a pair of Edcor XPP 15w transformers.
I've also got an uncut metal plate you can mount everything on. You'll have to supply your own power transformer. I'll also include a 8 pin socket and a 5u4gb tube if you want that.
That's a Rev D. I've already sold off the tubes and transformers. This has sat around for a couple years, and I don't see using it ever so it's gotta go.
I just can justify paying $40 for a set of EL84's when I've got about 200 possible output tubes in my closet. I should change my name to PackRat.
I just can justify paying $40 for a set of EL84's when I've got about 200 possible output tubes in my closet. I should change my name to PackRat.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.