FS: Speaker Drivers FREE Shipping in Australia!

[swin1]

I have some excess items from projects, and now that I am happy with my finished projects, I really need to ease my mind of more by letting the following go:

1. 2x CSS WR125S Drivers BNIB (Brand New in Box) - $110

2. 2x Mission CP-138 Drivers BNIB - $90
Check lautsprechershop.de for more information on these units, they would make a quality low end for a nice 10L - 15L monitor, I also have the tested specs pdf from Klang + Ton Magazine in Germany, showing a very smooth response out to 4khz and easily controllable breakup.

http://2008.swinbank.fastmail.net/ro...sion_cp138.pdf

They simulate nicely with 12sb/octave filter up to 3.5khz

3. 4x Avico SPT-1S 1" Silk Dome Tweeters - $30ea
These were a special purchase from Audiophile in Melbourne. I have not gotten around the measuring them, but I can ensure they are very nice tweeter sonically, and would be a perfect match to a 5" or smaller driver or as a replacement to a 3/4" tweeter with it's 94mm flange. I was going to pair these with the drivers above for 2 seperate systems, but at the moment I don't have the tools, space or time to put the systems together.

Specs are seen on box in second picture, DC Resistance 5.9ohm measured on all units.

See pictures:

http://www.ozphotolink.com/is.php?i=...g=SNV33479.JPG

http://www.ozphotolink.com/is.php?i=...g=SNV33481.JPG

4. 4x Jaycar CSS2240 Carbon Fibre Woofers 4ohm - entertaining offers
Don't really want to sell these but they were a popular woofer, probably the best offering from the response line. Heavy magnets with large rear ventilation, these sound very smooth in all regions mated to a largish 1" tweeter. I listened to them for some time with my Seas 27TFFC and was very impressed with the midrange clarity and bass response, the goal would be an MTM in an approx 44L enclosure, with a small flange tweeter such as the Vifa D26NC in stock at Madisound
On 2 of the woofers I removed the ordinary dustcap and pressed paper edges. I would apply a flat 60mm diamater cap for a nice looking drive unit!

T/S parameters (from catalogue

Impedance: 4ohm
Re: 3.9ohm
SPL: 89db
Power handling
Fs: 43Hz
Vas: 15.1L
Qts: 0.45
Qes: 0.47
Qms: 9.76

See pictures:

http://www.ozphotolink.com/is.php?i=...g=SNV33476.JPG

http://www.ozphotolink.com/is.php?i=...g=SNV33477.JPG

http://www.ozphotolink.com/is.php?i=...g=SNV33482.JPG

You can e-mail me at eswinbank@fastmail.com.au

Bank Transfer only please, paypal accepted but costs me so I will add exactly their charge to the total.

Thanks,
Andrew