Looking for 10,000+uF / 80-100V caps
 

Since six of my eight Nippon KMH caps in my P101 amp have failed I'm left without much filtering on the supply...

So I'm looking for 8 snap-in caps to replace them, 10,000 to 15,000uF at 80-100 volts (I prefer the latter).

Maximum size is 35mm diam. X 85mm height, must be good (known) brand, not used before and the newer the better.

Of lower importance - I'm also looking for lower voltage caps, around 10,000uF/50-63V for another project.

Thanks.

10mF, 80V, 35mm diameter are available. I have some from capacitor guy.

I have some snap In caps you might be interested in;

6800 Uf 80V Jung Fu $4.50 ea
8200 Uf 100V Samwha $3.29 ea
15,000 Uf 63V United Chemi-Con $2.99 ea

Only 2 of a 12,000 Uf 80V Cornell Dublier $4.95ea

Steve @ Apex Jr.

Still looking for 80-100V caps...

Have you had a look at this add:

http://www.diyaudio.com/forums/showt...438&highlight=

I just got 4pcs of Cornell Dubilier 22 000uF caps and they are fantastic , at that price it is really what you define as a bargain... Hope this helps.

I think these babes would never die on you :)
 

Just look at the terminals... You can't pass that much current through these 0GA solid aluminum posts, so you could kill the cap, can you? :D

I'll add to this too....

I now have some 10,000Uf 80V Snap Ins at $4.95ea

Also I just got in some more of a 15,000Uf 63V Snap In caps
made by Panasonic.
(information in the Vendors Bazaar under Apex Jr)


Steve