NEW Remote Volume Controller- 10 SETs

[bbp]

Originally posted by mattcalf
I, too am interested.

I also have a few questions:

• Is it 4 inputs?
• Is it 2 outputs?
• Is there anyway to get it 4 output?
• What volt powersupply is required?

Thanks

Originally posted by iamwhoiam
I'm very interested, but would like answers to the above:

Number of inputs/outputs?
Voltage requirements?

I've sent you an email too

Hi Matt and iamwhoiam

There are 4 stereo inputs and 1 output in this kit
User Manual sent


regards
Lu

[mattcalf]

From what I can gather the following power is required:

• for Motor: DC 5V 0.5A
• for main board: DC 7~12V 0.5A

Any suggestions? What kind of toroidal transformer would be required.

[bbp]

Originally posted by mattcalf
From what I can gather the following power is required:

• for Motor: DC 5V 0.5A
• for main board: DC 7~12V 0.5A

Any suggestions? What kind of toroidal transformer would be required.

Hi mattcalf,

You can order a 10VA transformer, which can offer 6V AC 0.5A and 9V AC 0.5A
Two LDOs, A LM7805 and a LM7809 is also required



regards
Lu

[mattcalf]

Such as this and then regulators for each circuit?

Thanks again.

[bbp]

Originally posted by mattcalf
Such as this and then regulators for each circuit?

Thanks again.

It seems that the current of the secondary is not enough >_<
You may order a transformer that has two secondary :


one Primary : Voltage of your contury
two Secondary: AC 0-6V 0.5A
AC 0-9V 0.5A


The motor of potentiometer needs +5V 0.5A PSU, and the main board needs +7V~12V 0.5A, there's a LM7805 on the main board

[bbp]

Originally posted by roscoeiii
Also, can you tell us more about the input selector?

User manual sent with email ^_^
The input selector icludes 4 stereo input and 1 output

[bbp]

bump for deal ^_^

[bbp]

bump for deal

[bbp]

bump for deal

Price drop to 55 USD shipped / per set

9 kit available

[r8833]

bbp,


any chance you can offer a power supply without transformer with kit?


Rich