FS: Pair Scan-Speak D2904/7100, (1) AirCirc & (1) AudioTechnology 15H

tf1216 · 12th May 2009, 12:33 PM

I came across a great deal on a second pair of 7100 tweeters so my original pair (used for 1 month) needs to be sold. I would like to get $400 shipped for the pair.

I built a center channel using (1) AirCirc and (1) 15H so I no longer have use for their counterparts.

I accidentally touched the backcup of the AirCirc with a soldering iron so it has a defect. I covered the hole with tape which seals it up. i tried finding a replacement with no luck. I would like $100 shipped for the tweeter.

Measurements of the tweeter can be seen at the link below. Dave modded the tweeter for me.
http://www.speakerdesign.net/scan_sp...0_tweeter.html

The 15H driver was recently tested my Mark at the link below:
http://audioheuristics.org/measureme..._test_data.htm

I would like to get $175 shipped for the driver.

If anyone has questions please e-mail me with them.

If anyone is interested in purchasing the single drivers to build the center channel I can pass on the center channel design. The center channel will require a pair of the Dayton Reference 7" (8 ohm) drivers to complete the build.

tf1216 · 13th May 2009, 01:39 PM

bump

Send offers peeps. I may be interested in trading for boutique caps.

tf1216 · 15th May 2009, 12:35 AM

to the top

any interest?

tf1216 · 17th May 2009, 01:31 AM

bump

tf1216 · 19th May 2009, 01:12 AM

one more try

tf1216 · 23rd May 2009, 01:36 AM

bump

I am open to any offers.

tf1216 · 27th May 2009, 11:10 AM

Interest check on a pair of 18H drivers that would match nicely with the 15H in a center channel.

Please contact me if the AudioTechnology drivers peak your interest.

tf1216 · 30th May 2009, 06:10 PM

bump

tf1216 · 1st June 2009, 04:10 PM

If you would like I am open to offers.

If you are interested in the pair of 18H drivers please let me know.

tf1216 · 2nd June 2009, 01:47 PM

Anyone interested in a package deal for the 6600, 15H and pair of 18H drivers? That would make one sweet L/R speaker and center channel or one AMAZING center channel.

12th May 2009, 12:33 PM	#1
tf1216 diyAudio Member Join Date: Nov 2004 Location: Minnesota	FS: Pair Scan-Speak D2904/7100, (1) AirCirc & (1) AudioTechnology 15H I came across a great deal on a second pair of 7100 tweeters so my original pair (used for 1 month) needs to be sold. I would like to get $400 shipped for the pair. I built a center channel using (1) AirCirc and (1) 15H so I no longer have use for their counterparts. I accidentally touched the backcup of the AirCirc with a soldering iron so it has a defect. I covered the hole with tape which seals it up. i tried finding a replacement with no luck. I would like $100 shipped for the tweeter. Measurements of the tweeter can be seen at the link below. Dave modded the tweeter for me. http://www.speakerdesign.net/scan_sp...0_tweeter.html The 15H driver was recently tested my Mark at the link below: http://audioheuristics.org/measureme..._test_data.htm I would like to get $175 shipped for the driver. If anyone has questions please e-mail me with them. If anyone is interested in purchasing the single drivers to build the center channel I can pass on the center channel design. The center channel will require a pair of the Dayton Reference 7" (8 ohm) drivers to complete the build.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTS: Scan Speak AirCirc D3004/6600 scanspeak	Syonyde	Swap Meet	1	17th February 2010 07:35 PM
NIB Scan Speak AirCirc Tweeters	sbrtoy	Swap Meet	1	13th May 2009 04:28 PM
1 pair of Scan Speak 9800	Jed	Swap Meet	2	24th July 2008 08:35 PM
2 way xoover for scan speak 18w4531 and D2904/7100	danyele	Multi-Way	9	3rd May 2008 10:49 AM
Look for a pair of Scan-speak 7100 tweeters	tf1216	Swap Meet	4	8th December 2006 10:38 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

13th May 2009, 01:39 PM	#2
tf1216 diyAudio Member Join Date: Nov 2004 Location: Minnesota	bump Send offers peeps. I may be interested in trading for boutique caps.

15th May 2009, 12:35 AM	#3
tf1216 diyAudio Member Join Date: Nov 2004 Location: Minnesota	to the top any interest?

17th May 2009, 01:31 AM	#4
tf1216 diyAudio Member Join Date: Nov 2004 Location: Minnesota	bump

19th May 2009, 01:12 AM	#5
tf1216 diyAudio Member Join Date: Nov 2004 Location: Minnesota	one more try

23rd May 2009, 01:36 AM	#6
tf1216 diyAudio Member Join Date: Nov 2004 Location: Minnesota	bump I am open to any offers.

27th May 2009, 11:10 AM	#7
tf1216 diyAudio Member Join Date: Nov 2004 Location: Minnesota	Interest check on a pair of 18H drivers that would match nicely with the 15H in a center channel. Please contact me if the AudioTechnology drivers peak your interest.

30th May 2009, 06:10 PM	#8
tf1216 diyAudio Member Join Date: Nov 2004 Location: Minnesota	bump

1st June 2009, 04:10 PM	#9
tf1216 diyAudio Member Join Date: Nov 2004 Location: Minnesota	If you would like I am open to offers. If you are interested in the pair of 18H drivers please let me know.

2nd June 2009, 01:47 PM	#10
tf1216 diyAudio Member Join Date: Nov 2004 Location: Minnesota	Anyone interested in a package deal for the 6600, 15H and pair of 18H drivers? That would make one sweet L/R speaker and center channel or one AMAZING center channel.