• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

FS: Pair Scan-Speak D2904/7100, (1) AirCirc & (1) AudioTechnology 15H

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
I came across a great deal on a second pair of 7100 tweeters so my original pair (used for 1 month) needs to be sold. I would like to get $400 shipped for the pair.

I built a center channel using (1) AirCirc and (1) 15H so I no longer have use for their counterparts.

I accidentally touched the backcup of the AirCirc with a soldering iron so it has a defect. I covered the hole with tape which seals it up. i tried finding a replacement with no luck. I would like $100 shipped for the tweeter.

Measurements of the tweeter can be seen at the link below. Dave modded the tweeter for me.
http://www.speakerdesign.net/scan_speak/tweeters/6600/6600_tweeter.html

The 15H driver was recently tested my Mark at the link below:
http://audioheuristics.org/measurements/Testing/Midrange3/midrange_3_test_data.htm

I would like to get $175 shipped for the driver.

If anyone has questions please e-mail me with them.

If anyone is interested in purchasing the single drivers to build the center channel I can pass on the center channel design. The center channel will require a pair of the Dayton Reference 7" (8 ohm) drivers to complete the build.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.