PCB's for hypex, ucd, gainclones, etc and CAPS!

[cowanrg]

i have a few goodies for sale. i've been doing some prototyping and need some things done. here is what i have:

i have two different power supply boards, designed with the UCD modules in mind. there's really nothing too special to the board, it's a high quality board manufactured locally by one of the largest board manufacturing plants. it's a 4-layer board professionally designed by an EE. i have two versions. both use 40mm main caps with 22.5 lead centers. they also have spaces for small film caps (6 x 12.5 mm, with 10.5mm lead spacing). one is a 5-channel board (could be used for 1, 2, 3, 4 or 5 channels really, and the other is a 2-channel board. i have schematics if you need.

$15 each per board. the pads are a bit small on the T-shaped board, but its doable, you just need to be a bit careful. if you get a short, just recheck your soldering. you can't be sloppy. all use phoenix connectors for ins and outs. i have plenty if you want some, we can talk price.

i have 6 of the T-shaped board and 20+ of the other board. good generic power supply board.

i also have some panasonic T-UP capacitors.

(16) - 80V, 10,000uf
(4) - 100V, 10,000uf
(4) - 63v, 18,000uf
(6) - 80v, 15,000uf

$5 each shipped.

some of the caps are used and have the two dummy pins clipped. they aren't used for anything, just stability. they were all used for maybe 5 hours or so. they are essentially new. they of course fit the boards.

i also have a lot of the phoenix connectors that fit the boards.

[cowanrg]

the T-shaped 2-channel board.

[cowanrg]

(16) - 80V, 10,000uf
(4) - 100V, 10,000uf - SOLD!!!
(4) - 63v, 18,000uf
(6) - 80v, 15,000uf - SOLD!!!

[cowanrg]

still available!

[cowanrg]

i still have this stuff for sale. make me an offer!