DIY Aleph P use as is or use for high end parts

kilowattski · 22nd March 2009, 05:29 PM

I am selling my DIY Aleph P Pre-Amplifier. It is very neatly wired and uses only the best components including Plitron Toroidal Transformer, Holco Resistors, Nichicon Capacitors, Black Gate Capacitors and DACT Step Attenuators. The chassis has been engraved with all reference designations. It could be used as is, or one could build another preamp around the chassis utilizing the power supply. I am only asking $200. After all the Pass Labs clones I have built, I finally have the real thing. I now have an X350.5 and X1.

Guiness · 22nd March 2009, 07:04 PM

email on its way

max426 · 22nd March 2009, 09:33 PM

If Guiness does not buy this for some reason i will buy
jim

HaLo6 · 22nd March 2009, 10:49 PM

I am interested if it doesnt go!

kilowattski · 23rd March 2009, 03:24 AM

The preamp has been sold to the first offer received which was tendered by Guiness. Thanks to all of those who were interested.

DT053 · 23rd March 2009, 03:59 AM

Interested also... PayPal waiting if no one else gets it.

dT

22nd March 2009, 05:29 PM	#1
kilowattski diyAudio Member Join Date: Aug 2003 Location: Long Island, New York	DIY Aleph P use as is or use for high end parts I am selling my DIY Aleph P Pre-Amplifier. It is very neatly wired and uses only the best components including Plitron Toroidal Transformer, Holco Resistors, Nichicon Capacitors, Black Gate Capacitors and DACT Step Attenuators. The chassis has been engraved with all reference designations. It could be used as is, or one could build another preamp around the chassis utilizing the power supply. I am only asking $200. After all the Pass Labs clones I have built, I finally have the real thing. I now have an X350.5 and X1. __________________ ----------------------------------------------- Kilowattski

22nd March 2009, 07:04 PM	#2
Guiness diyAudio Member Join Date: Dec 2002 Location: USA	email on its way __________________ Guiness

23rd March 2009, 03:24 AM	#5
kilowattski diyAudio Member Join Date: Aug 2003 Location: Long Island, New York	The preamp has been sold to the first offer received which was tendered by Guiness. Thanks to all of those who were interested. __________________ ----------------------------------------------- Kilowattski

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mini Aleph Board & Aleph 2 Parts List	gpsmithii	Pass Labs	3	16th January 2010 03:58 AM
FS: Chip Amp Kit (High end parts) and Marchard XM1(2x) with PS10	Destroyer OS.	Swap Meet	0	1st December 2006 10:37 PM
High Quality X/O Parts	nelsondog	Swap Meet	0	25th August 2006 05:02 PM
Low-parts high voltage MOSFET regulator	arnoldc	Power Supplies	1	6th June 2006 10:25 AM
Aleph 2 parts	JayV	Pass Labs	14	22nd October 2003 08:55 PM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

22nd March 2009, 09:33 PM	#3
max426 diyAudio Member Join Date: Aug 2008 Location: Pa. USA	If Guiness does not buy this for some reason i will buy jim

22nd March 2009, 10:49 PM	#4
HaLo6 diyAudio Member Join Date: Dec 2008	I am interested if it doesnt go!

23rd March 2009, 03:59 AM	#6
DT053 diyAudio Member Join Date: Aug 2004 Location: TN	Interested also... PayPal waiting if no one else gets it. dT

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read