Tubes and amps basement clearout

[whitelabrat]

I have more stuff than I can get to any time to work on, and I intend to sell the house soon. I'd like to post here before I go to ebay. I consider any reasonable offer. I'll supply photos on request and am happy to answer any questions. I'll ship at cost via USPS unless otherwise requested. Hurry and buy before I chicken out!

I have a relative who would like me to sell a pair of McIntosh MC75's on his behalf (I'd buy 'em myself if I could). $4000 for pair.

Simple SE featuring the mighty Hammond 1628SEA OPT's, Angela Copper Foil caps and other warm fuzzy parts. I'll likely : $1000 firm

DiyTube ST35 amp
Diytube ST35 board stuffed w/: $125
w/ low milage tubes: add $35
w/ 6H choke: add $10
w/ 2 Edcor XPP15-8-8K add $30
w/ Hammond 373BX power transformer: add $70
Everything and dumpy chassis: $225

The problematic Cheapfield HA2 w/ two ASC caps: $200

Tektronics 531 Ocilloscope with type 53/54c dual trace plugin, 2 probes and w/tubes. Not working for me, but does power up. (shipping may be a challange) $100 or may considering parting out.

Bogen MX60A tube PA amplifier. Not working condition. I was going to convert this for guitar use with 6bg6ga's. $40

Bogen MU-15 tube PA amp. Good transformers, but has power supply problems and needs repair. Was going to convert to guitar use with 6aq5 tubes. $30

Not working, Beis.de DAC with most electrolytic caps removed. Can throw in inexpensive caps. $20

6080 tubes (good but condition unconfirmed) $3 each:
4 GE, 1 Sylvania, 2 Westinghouse, 2 RCA

$1.25 per tube:
5 JAN 6005W
5 GE 6005
4 GE 6aq5a
4 Sylvania 6095
5 Raytheon 6aq5a (made in Japan)
2 rca 6aq5a
2 Silvertone 6aq5a

2 old crusty 8k push pull output transformers (8, 16, 32 ohm secondaries) $20 for pair?

6.3v 2A potted transformer (Chicago Transformer) $12

I've also got a hodge-podge collection of TV tubes. Everything for $10.

A lot of used (but usable) 5u4gb rectifier tubes (at least 10): $10

[whitelabrat]

And I've got a pair of fried EV Eliminator PA speakers. Free to whoever comes and gets them in the D.C metro area.

I have an EV Eliminator sub cab that I'll part with for $50 if you pick it up locally. Otherwise $100.

[sorenj07]

Hope I'm quick enough

What do the crusty 8K transformers look like? I'll take either those or the XPP's if you'll let them go without the rest of the ST-35 stuff.

What current is the 6H choke rated for? I'm interested in that too.

[n_maher]

Mr. Rat,

Email inbound about the Cheapfield. [edit] Oops, looks like I can't email you through the forums. Please send me a message, I'm interested.

[whitelabrat]

n_maher has mail. Sale pending one last test.

sorenj07 here's a photo of one of the old 8k OPT's. They were salvaged from a Calbest amp that wasn't worth the effort to repair. They sound good to me and are good for triode or pentode operation.

The Edcors got to have the ST35 board to go with them or I don't have anything to listen to any more.

[strhd07]

I can't send a PM 'cause I'm a newbie here, but I'm interested in these 5U4s. Please get in touch.

Mark

[whitelabrat]

Oh and same thing about the Triad C-14X 6H 200ma choke with regards to the ST35. I don't want to part out the ST35 until the board is sold.

[whitelabrat]

OK strhd07. The 5U4's are yours. A bunch of them are RCA's. I'll take mail at orange DOT kangaroo AT gmail DOT com. Drop me a line and we can work out the details

[whitelabrat]

I also have a Sansui AU-D7 that has issues. Smells like it needs a recapping, and I've got a set of FETs/MosFET/whatevertheheck in case those are toast too. Service manual included. Big power tranny and heavy. $30 obo?

I've got a NAD PE???? integrated amp with a failed output section. Some refer to the PE as Possible Explosions. The preamp is separate and that what I've been using it for. I've repaired my Yamaha C-6 so I don't need this anymore: $20

[sorenj07]

OK, that's understandable. How much would shipping be to Boston (02116) for the OPT's and all your 6005's?