Modushop.biz heatsinked enclosure + F5 Amplifier (Nearly Complete) incl traffo

rhysh · 27th February 2009, 07:12 AM

Hi,

I have decided that that F5 is not going to be fit for my application, after spending so much money on it!

For sale i have,

The 3U pesante enclosure with the heatsink option, pre drilled for cvillers borads and for mosfet mounting. All holes tapped. All standoffs installed for board mounting. Holes are pre drilled to mount cvillers PSU board, and also to mount the transformer.

Avel lindberg 500va 2x18vac transformer - total power on time around 2hrs.

Cviller PSU board - fully populated with 22,000uf capacitors and 3w resistors.

Cvillers Amp boards - fully populated with standard parts, only problem is one transistor had to be 'surface mounted' becuase of a soldering error.

2 x Vishay 30A bridge rectifiers.

All transformer leads are terminated with quick connect terminals.

All thermal pads and mounting hardware for the build will be included. There is NOTHING left to buy to complete this build, except the rear panel connectors.

Pictures will follow later,

Im asking for around £230, or $330. I may accept offers if they are within reason.

I can ship worldwide, but within europe would be easier.

rhysh · 28th February 2009, 07:55 AM

£200...

rhysh · 28th February 2009, 02:35 PM

Images attached. I will include the RCA's on the rear panel. The drills for the binding posts i belive are 12mm holes, using standard spacing.

rhysh · 28th February 2009, 02:37 PM

Here is the case

Note all transformer leads are terminated with crimp terminals.

This has to go soon!

Front panel is still wrapped up.

Algar_emi · 5th March 2009, 01:36 AM

Hi rhysh. I sent you an email asking if the F5 was still available. Still no reply

Thanks...

SB

rhysh · 5th March 2009, 07:45 AM

Sorry i thought i replied. The F5 is sold.

Duggeh · 2nd July 2009, 03:59 AM

I'd like to point out that I'm the one who bought this incomplete amp from Rhys (back at the start of March).

4 months. FOUR MONTHS later, I am still waiting for various parts to get to me. It has taken so long I've actually moved house in the meantime.

Stay away from this feckless fool.

Renron · 2nd July 2009, 06:52 AM

Duggeh,
Alway dissapointing to hear one of our own be a flake.

I hope you get all your parts soon.

I feel for you.

Ron

lowpoke · 3rd July 2009, 07:11 AM

If it's any consolation, it looks like it will be a nice amp if/when you ever get it completed

Duggeh · 3rd July 2009, 02:13 PM

My AKG K1000 continue to wait.

Ho hum.

27th February 2009, 07:12 AM	#1
rhysh diyAudio Member Join Date: Sep 2008	Modushop.biz heatsinked enclosure + F5 Amplifier (Nearly Complete) incl traffo Hi, I have decided that that F5 is not going to be fit for my application, after spending so much money on it! For sale i have, The 3U pesante enclosure with the heatsink option, pre drilled for cvillers borads and for mosfet mounting. All holes tapped. All standoffs installed for board mounting. Holes are pre drilled to mount cvillers PSU board, and also to mount the transformer. Avel lindberg 500va 2x18vac transformer - total power on time around 2hrs. Cviller PSU board - fully populated with 22,000uf capacitors and 3w resistors. Cvillers Amp boards - fully populated with standard parts, only problem is one transistor had to be 'surface mounted' becuase of a soldering error. 2 x Vishay 30A bridge rectifiers. All transformer leads are terminated with quick connect terminals. All thermal pads and mounting hardware for the build will be included. There is NOTHING left to buy to complete this build, except the rear panel connectors. Pictures will follow later, Im asking for around £230, or $330. I may accept offers if they are within reason. I can ship worldwide, but within europe would be easier.

2nd July 2009, 06:52 AM	#8
Renron diyAudio Member Join Date: Jan 2007 Location: Sacramento	Duggeh, Alway dissapointing to hear one of our own be a flake. I hope you get all your parts soon. I feel for you. Ron __________________ "If it doesn't work properly, hope it catches on fire"- Nelson Pass @ BA3 "I fired up the prototype. Literally." The Prophet Pass.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Heatsinked resistos?	Scribble	Parts	4	26th March 2009 09:30 PM
big valve traffo for guitar amp?	Craig405	Tubes / Valves	15	9th October 2007 09:53 PM
Traffo connection QS	Bassivus	Power Supplies	3	22nd October 2006 11:33 AM
Spiral Shaped Transmission Line Enclosure Project Complete	kneadle	Multi-Way	45	4th November 2004 12:30 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

28th February 2009, 07:55 AM	#2
rhysh diyAudio Member Join Date: Sep 2008	£200...

28th February 2009, 02:35 PM	#3
rhysh diyAudio Member Join Date: Sep 2008	Images attached. I will include the RCA's on the rear panel. The drills for the binding posts i belive are 12mm holes, using standard spacing.

28th February 2009, 02:37 PM	#4
rhysh diyAudio Member Join Date: Sep 2008	Here is the case Note all transformer leads are terminated with crimp terminals. This has to go soon! Front panel is still wrapped up.

5th March 2009, 01:36 AM	#5
Algar_emi diyAudio Member Join Date: Oct 2002 Location: Canada, Qc	Hi rhysh. I sent you an email asking if the F5 was still available. Still no reply Thanks... SB

5th March 2009, 07:45 AM	#6
rhysh diyAudio Member Join Date: Sep 2008	Sorry i thought i replied. The F5 is sold.

2nd July 2009, 03:59 AM	#7
Duggeh diyAudio Member Join Date: Jan 2008	I'd like to point out that I'm the one who bought this incomplete amp from Rhys (back at the start of March). 4 months. FOUR MONTHS later, I am still waiting for various parts to get to me. It has taken so long I've actually moved house in the meantime. Stay away from this feckless fool.

3rd July 2009, 07:11 AM	#9
lowpoke diyAudio Member Join Date: Mar 2009 Location: Australia	If it's any consolation, it looks like it will be a nice amp if/when you ever get it completed

3rd July 2009, 02:13 PM	#10
Duggeh diyAudio Member Join Date: Jan 2008	My AKG K1000 continue to wait. Ho hum.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)