CDM-4/19 Mechs for sale

amc184 · 25th February 2009, 02:03 AM

Hi guys,

I'm selling off some of my CD player parts, mostly CDM-4/19 related stuff. I have put this listing on eBay, but any members are welcome to PM me offers. I have about three CDM-4/19 mechs to sell, as well as a bunch of other related parts, such as disc trays, clamps, springs, dampers, subframes, belts, loading motors, transformers, even whole mainboards.

If you are after any parts for a CDM-4/19 player, give me a PM!

Anton

amc184 · 26th February 2009, 03:07 AM

I'm also after a CDM-2/10, so if anyone has one, and wants a CDM-4/19, I'm keen to trade.

amc184 · 13th March 2009, 05:45 AM

Still available, wanting US$70 each. Offers considered, especially for more than one.

amc184 · 24th March 2009, 08:53 AM

All seven sold, I'll post again when I get some more.

dtm1962 · 22nd April 2010, 05:02 AM

It looks like the ribbon connector is the cause of all the problems I am having with my Rotel 855. I was going to wire 2-3 individuls wires from the laser unit to the circuit board (solder underneath) to test my theory.

So I am looking for a laser assembly and/or cdm-4/19 assembly to buy.
Also looking for a top clamp with ball as well for same transport.

Let me know if have anything like these.

Thanks,

Dan

amc184 · 22nd April 2010, 05:11 AM

I sell a few laser mechanisms through eBay, but I don't have any right now (my listings are here). The other parts I'll give for free. PM me if you want to know more.

22nd April 2010, 05:02 AM	#5
dtm1962 diyAudio Member Join Date: Apr 2003 Location: Sarnia, Ontario, Canada	Looking for a Laser assembly (CDM4/19) and its Top Clamp with Ball It looks like the ribbon connector is the cause of all the problems I am having with my Rotel 855. I was going to wire 2-3 individuls wires from the laser unit to the circuit board (solder underneath) to test my theory. So I am looking for a laser assembly and/or cdm-4/19 assembly to buy. Also looking for a top clamp with ball as well for same transport. Let me know if have anything like these. Thanks, Dan __________________ Dan

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Quick slipping belt fix for CD player mechs	georgehifi	Digital Source	0	24th May 2008 09:36 PM
Which oil for CDM4 mechs?	johnm	Digital Source	9	4th June 2007 07:40 PM
For Sale: Fostex FE206E...forced sale	Illusus	Swap Meet	1	20th February 2005 01:38 AM
4 SALE!! avermedia tv genie vga tv tuner capture device... thing.... 4 SALE!!	lone_wolf_84	Swap Meet	0	3rd February 2005 12:26 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

26th February 2009, 03:07 AM	#2
amc184 diyAudio Member Join Date: May 2007 Location: Christchurch	I'm also after a CDM-2/10, so if anyone has one, and wants a CDM-4/19, I'm keen to trade.

13th March 2009, 05:45 AM	#3
amc184 diyAudio Member Join Date: May 2007 Location: Christchurch	Still available, wanting US$70 each. Offers considered, especially for more than one.

24th March 2009, 08:53 AM	#4
amc184 diyAudio Member Join Date: May 2007 Location: Christchurch	All seven sold, I'll post again when I get some more.

22nd April 2010, 05:11 AM	#6
amc184 diyAudio Member Join Date: May 2007 Location: Christchurch	I sell a few laser mechanisms through eBay, but I don't have any right now (my listings are here). The other parts I'll give for free. PM me if you want to know more.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)