FS: AR (Acoustic Research) midranges and tweeters - diyAudio
Go Back   Home > Forums > Commercial Sector > Swap Meet

Swap Meet Sell your stuff here, who knows, some other fanatic might be interested!

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 15th February 2009, 12:53 AM   #1
diyAudio Member
 
Jack Hidley's Avatar
 
Join Date: May 2007
Location: Danville, CA
Send a message via Skype™ to Jack Hidley
Default FS: AR (Acoustic Research) midranges and tweeters

I have a fairly large selection of AR tweeters and midranges that I've decided to sell. Below is a list of what I have with links to photos below the description. Many of these are AR reference drivers. This means they were the actual original driver that AR used to design the speaker product around. I have tested all of these drivers. They all function correctly, unless noted. If you are interested in any of the drivers, please contact me at jhidley at comcast dot net.

2-11-005-1, 1.5" midrange used in AR 338 and 338T speakers. Excellent condition. One of these drivers is the original reference driver. Three drivers are available.

http://home.comcast.net/~jhidley/a.JPG
http://home.comcast.net/~jhidley/b.JPG
http://home.comcast.net/~jhidley/c.JPG

10pi 1.5" beebut style reference midrange. Made is USA. I believe that it is the same as the LST and 3A also, if the cabinets are converted to rear mount leads. At some point in this drivers life, the screen was crushed. I've pulled it out of the dome, but the impedance curve is still rough around 500-1,000Hz indicating that the dome is touching the fiberglass underneath. If someone cuts off the screen, pulls the fiberglass off and reglues it, I'm sure the driver will work perfectly. One driver is available.

http://home.comcast.net/~jhidley/d.JPG
http://home.comcast.net/~jhidley/e.JPG

2-11-002-1, 1.5" beebut style midrange from the 302, 302T, 303, 303A. Two drivers are available. One of them is the reference driver. Can you guess which one?

http://home.comcast.net/~jhidley/f.JPG
http://home.comcast.net/~jhidley/i.JPG

1210010-1, 1.5" beebut style midrange, made by Foster. I believe that this fits the 10pi, LST, 3A, etc. One driver is available.

http://home.comcast.net/~jhidley/g.JPG

200048-0, dual dome midrange/tweeter module. Made in USA. This fits the MGC-1, 9Ls, 9Lsi, 98Lsi, 78Ls. These modules have lots of dust on them. I have made no attempt to clean them. Three of the four available are reference units.

http://home.comcast.net/~jhidley/j.JPG
http://home.comcast.net/~jhidley/l.JPG
http://home.comcast.net/~jhidley/m.JPG
http://home.comcast.net/~jhidley/n.JPG

1-210048-0, dual dome midrange/tweeter module. Made by Foster. This fits the MGC-1, 9Ls, 9Lsi, 98Lsi, 78Ls. These modules have lots of dust on them. I have made no attempt to clean them.

http://home.comcast.net/~jhidley/k.JPG
http://home.comcast.net/~jhidley/o.JPG

1-210064-0, 1" soft domes, made by Foster. These were used in the MGC-1 as the side firing tweeters. I'm not sure what else they fit. One of them has an AR logoed faceplate. The other two have the generic Foster faceplate with exactly the same dimensions.

http://home.comcast.net/~jhidley/p.JPG
http://home.comcast.net/~jhidley/q.JPG
http://home.comcast.net/~jhidley/v.JPG

205VC 1" soft dome center channel reference tweeter. I can't remember what the part number for this is right now. One driver available.

http://home.comcast.net/~jhidley/r.JPG

2-11-008-1, 208V center channel reference tweeter. One driver available.

http://home.comcast.net/~jhidley/s.JPG

2-11-003-1, 338, 338T, 302, 302T, 303, 303A 3/4" soft dome tweeter. One of these is the reference driver. One has something spilled all over the faceplate. I'm sure I can clean this off. Three drivers are available.

http://home.comcast.net/~jhidley/t.JPG
http://home.comcast.net/~jhidley/u.JPG
http://home.comcast.net/~jhidley/x.JPG

2-11-007-1, 218V 3/4" soft dome tweeter, shielded. This is the reference driver. The dome has been crushed, but the driver measures fine. I'm sure that I can repair this with a little work.

http://home.comcast.net/~jhidley/w.JPG

I also have four reference woofers for the 302 and 302T. I believe that the part number is 2-11-010-1. Perfect condition.
__________________
Jack Hidley
ACS
  Reply With Quote
Old 19th March 2010, 08:47 PM   #2
diyAudio Member
 
Join Date: Dec 2008
Default Ar28

Would anyone happen to have a Teledyne 1"dome for the AR28?
Thank You!
Niles
  Reply With Quote
Old 19th March 2010, 09:38 PM   #3
diyAudio Member
 
Jack Hidley's Avatar
 
Join Date: May 2007
Location: Danville, CA
Send a message via Skype™ to Jack Hidley
Niles,

Can you post good photos of the front and back of the driver?
__________________
Jack Hidley
ACS
  Reply With Quote
Old 19th March 2010, 10:58 PM   #4
diyAudio Member
 
Join Date: Dec 2008
Default AR28 Tweeter

Here you go.
Niles
Attached Images
File Type: jpg ar28tweeter.jpg (212.6 KB, 385 views)
File Type: jpg ar28back.jpg (186.2 KB, 372 views)
  Reply With Quote
Old 20th March 2010, 06:39 PM   #5
diyAudio Member
 
Jack Hidley's Avatar
 
Join Date: May 2007
Location: Danville, CA
Send a message via Skype™ to Jack Hidley
Niles,

Nope. I don't have anything like that.
__________________
Jack Hidley
ACS
  Reply With Quote
Old 1st October 2010, 06:24 PM   #6
diyAudio Member
 
Join Date: Oct 2010
jack,
have just posted for advice on AR7 restoration.. I've become a member so as to seek this advice all the way from Belgium.

The 7's were free from my dad, who got them from new. inside as new and sound lovely.

Q. the front cloth needs replacing. how? the back looks like a complete No No. and before I just hack off the fron cloth...advice would be great. don't want to be left with naked speakers and no idea on how to re-cloth them.

any advice greatly appreciated.

stephen
belgium
  Reply With Quote
Old 14th February 2011, 08:59 PM   #7
diyAudio Member
 
Jack Hidley's Avatar
 
Join Date: May 2007
Location: Danville, CA
Send a message via Skype™ to Jack Hidley
All of the drivers for sale in post #1 are gone.
__________________
Jack Hidley
ACS
  Reply With Quote
Old 21st February 2011, 08:03 PM   #8
diyAudio Member
 
Join Date: Feb 2011
Default Amps?

Jack,

Have any amps (plate preferred) that I can use for a sub project? Please PM or email me if you do.

Thanks!

Eric.
  Reply With Quote
Old 17th January 2013, 01:13 AM   #9
diyAudio Member
 
Join Date: Jan 2013
Do you have a ar200048 left in your inventory? -Paul
  Reply With Quote
Old 5th September 2013, 05:52 AM   #10
diyAudio Member
 
Join Date: Sep 2013
Default buying two 200048 AR midrange and tweeter dual drivers

I could not find the price you want for your dual driver 200048. please send me the price for 2.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Scanpeak Midranges & Pioneer OEM radial Tweeters dtm1962 Swap Meet 3 22nd March 2009 12:12 AM
FS Scan Speak Tweeters & Midranges bigLG Swap Meet 8 8th February 2009 01:37 AM
Acoustic Research LST replacement tweeters Charles Wasserf Multi-Way 2 8th June 2008 02:28 AM
FS: Beyma CP21F tweeters, neoplanar midranges pkpickard Swap Meet 5 19th February 2007 03:00 AM
acoustic research AR1 bassdabob Multi-Way 1 20th October 2005 11:53 AM


New To Site? Need Help?

All times are GMT. The time now is 04:12 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2