• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

NEW Pair of Dynaudio D-52AF NIB in Perfect Condition

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Dynaudio D-52AF Pair NEW NIB in Perfect Condition
Never used, never mounted, never soldered, and never connected with alligator clips.

Asking $300.00 for the pair.

An externally hosted image should be here but it was not working when we last tested it.


An externally hosted image should be here but it was not working when we last tested it.


An externally hosted image should be here but it was not working when we last tested it.


No handling charges.

Will mail for actual cost.

sanovak@comcast.net
 
Specifications

I can also accept credit card payments through PayPal.

Shipping weight is 9 lbs from 5512

D-52 AF Specifictions from Dynaudio Literature:

Nominal Power = 200 Watts DIN

Music Power = 800 Watts DIN

Transient Power for 10 mS = 1,000 Watts

Frequency Response = 400 HZ to 8,000 HZ

Resonance Free Air Fs = 350 HZ

Rise time = 45 µS

Efficiency = 91 dB, 1 Watt at 1 Meter

Nominal Impedance Zcv = 8 ohms

Minimum Impedance Zmin = 6.4 Ohms

DC Resistance Re = 4.6 ohms

Harmonic Distrotion < 0.4%

Intermodulation distrotion < 0.2%

Cone Effecive Area SD = 28 cm2

Moving Mass = Mms = 2.78 g

Linear Volume Displacement Vd = 8.4 cm3

Voice Coil Diameter d = 54 mm

Voice Coil Length h = 7 mm

Voice Coil Layers n = 2

Inductance 1 KHZ Le = 0.07 mH

Qms = 1.10

Qes = 1.03

Qts = 0.53
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.