diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Swap Meet (http://www.diyaudio.com/forums/swap-meet/)
-   -   FS LM3886 Triple monoblock amp (http://www.diyaudio.com/forums/swap-meet/137383-fs-lm3886-triple-monoblock-amp.html)

chevy2410 27th January 2009 12:19 AM

FS LM3886 Triple monoblock amp
 
2 Attachment(s)
Hi all,

I need to liquidate some of my stereo gear and need to sell my DIY LM3886 triple monoblock amp. All amp chips and transformers are in one enclosure. The enclosure is a prebuilt unit with a custom 1/8th inch solid aluminum faceplate. The power switch is on the front left and one blue LED to indicate power in the middle. The transformers are Avel-Lindberg and were purchased from Apex jr. The specs are:

Input: 2 X 120Vac 50-60 Hz
3 3/4" Dia X 1 1/2" Tall

Output: 2 X 28.4V @ 2.67Amps over 150Va

All three transformers have their own PS boards as well as 2amp slow blow fuses. The PS boards and the amp boards were purchased from Brian GT at chipamp.com. I originally purchased a dual monoblock kit and then a friend gave me a single monoblock kit he had kickin'around so I thought I would use all three in one enclosure. Each LM3886 amp chip is cooled by a solid aluminum Pentium 4 cpu cooler. I have found that it works quite well. Speaker connections are dual binding posts red and black. I have also used 1\8th inch steel plate to sectioned off each amp from each other and to keep the PS board and transformer isolated from the amp chips. The top cover of the enclosure has slotted vents near the back to dissipate any heat. Rubber grommets are used where wires are feed through. This triple monoblock LM3886 produces 68w per channel into 8ohms. This amp can produce very loud volumes quite easy. I've never had an issue getting any kind of volume from this amp. Now I've never owned any high end amps before, but compared to the amps that come with AV receivers these days, this amp kicks butt!! All you need to do is go to the chipamps section and read the postings. I would really like to get back what I put into it. I'm not looking to make any prophet. This amp really needs a good home.:D

$300.00cdn OBO plus shipping.

Thanks for looking,
Chevy

chevy2410 27th January 2009 03:51 AM

2 Attachment(s)
Here's a pic of the inside.

chevy2410 27th January 2009 03:52 AM

2 Attachment(s)
And one of the back.

BigBill6778 3rd February 2009 01:01 PM

still have that amp for sale I live in Ontario and would like to buy it how much does it weigh for shipping

chevy2410 3rd February 2009 08:33 PM

Quote:

still have that amp for sale I live in Ontario and would like to buy it how much does it weigh for shipping
Yes the amp is still FS. The amp weighs about 25lbs boxed up. Give me your postal code and I can calculate a shipping rate for you.

Chevy

BigBill6778 3rd February 2009 09:44 PM

Hey chevy

334 collingwood st
Sarnia,Ontario
N7T 6N4

chevy2410 4th February 2009 12:05 AM

Quote:

Shipping to N7T 6N4
Shipping will be $31.00cdn. If you want to continue the conversation feel free to email me directly.

Thanks,
Chevy :)

chevy2410 8th February 2009 06:08 PM

Amp is still FS.

Chevy


All times are GMT. The time now is 02:39 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2