|
|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Swap Meet Sell your stuff here, who knows, some other fanatic might be interested! |
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
|
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
diyAudio Member
Join Date: Jun 2005
Location: uk
|
Hi, restoring an old inca tech amp and need 2 pairs of 2SK414/2SJ119 - wondered if anyone has any before I pay through the nose!
Have tried 2SK1529/2SJ200 as replacements and, without further investigation, am getting distortion in both channels, so would like to track down originals if I can Cheers James |
|
|
|
|
#2 |
|
Did it Himself
diyAudio Member
|
You could try replacing the whole lot with IRFP240 and IRFP9240 with a little bit of tweaking to the bias. This would be a lot cheaper. They are not quite as good as the original devices, but you can get good results with them.
__________________
www.readresearch.co.uk my website for UK diy audio people - designs, PCBs, kits and more |
|
|
|
|
#3 |
|
diyAudio Member
Join Date: Nov 2006
|
Have Toshiba's 2SJ115/2SK405 but no Hitachi's 2SK414/2SJ119.
|
|
|
|
|
#4 |
|
diyAudio Member
Join Date: Jun 2005
Location: uk
|
Thanks Folks. I'll keep looking for the moment. Housing - are the toshiba fets you have very similar to the Hitachi? I've read threads where amps containing those fets have been mentioned in the same breath as the hitachi ones.
|
|
|
|
|
#5 | |
|
diyAudio Member
Join Date: Nov 2006
|
Quote:
http://www.datasheets.org.uk/search....sk405&manystr= http://www.datasheets.org.uk/search....sk414&manystr= |
|
|
|
|
|
#6 |
|
diyAudio Member
Join Date: Jun 2005
Location: uk
|
Thanks. There are some differences, namely gate-source cut-off voltage and drain-source saturation voltage, so perhaps they re not dopin replacements. Look very similar otherwise.
|
|
|
|
|
#7 |
|
diyAudio Member
Join Date: Jun 2005
Location: uk
|
Still looking folks, in case anyone has any, thanks.
|
|
|
|
|
#8 |
|
diyAudio Member
|
Hi there,
Incase you are still looking for these Fets take a look at the ebay links below. 2SK414 330516356291 2SJ119 330516356442 These look pretty genuine to me and at £4 each grab them while you can. Best Regards Anthony |
|
|
|
|
#9 |
|
diyAudio Member
Join Date: Jun 2005
Location: uk
|
ta, just ordered a couple of each just in case.
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Wanted Mordaunt-short MSW20 Schematic Wanted | simon dart | Subwoofers | 0 | 22nd May 2009 08:19 AM |
| Wanted - 2SK414/2SJ119 | Spev | Solid State | 0 | 13th January 2009 10:09 AM |
| Help wanted with PVC TLs. | Spasticteapot | Full Range | 3 | 20th November 2006 03:46 PM |
| Wanted: Tvc | doctersava | Swap Meet | 9 | 8th July 2006 05:42 AM |
| CDM3 wanted , most wanted! | Gasho | Swap Meet | 1 | 31st March 2006 05:48 AM |
| New To Site? | Need Help? |
| Page generated in 0.09592 seconds (76.47% PHP - 23.53% MySQL) with 10 queries |