Lowther DX4 with Bud Purvine Enabl pattern

limono · 15th December 2008, 09:23 PM

A pair of those first enabled DX4's with Beauhorn small wooden phase plug (also with Enabl pattern) . I bought them used from England (as a pair) but they are from different production run apparently. They are pictures in Bud's Enabl thread. I'm building compression driver based system so time to part with "the best driver in the world " according to some .$1450 shipped in CONUS.
I'll give potential buyer 48 hours to decide on the deal but he will have to cover shipping cost in a case he doesn't like them .
Regards, Limono

limono · 17th December 2008, 02:20 PM

I think I'm asking too little for "the best driver in the world "

...
I can hagle on price is somebody is really interested . Did I stress enough that Bud himself painted those and original Beauhorn phase plugs are tad expensive to buy??
No trades this time as I'm swamped with drivers and parts already.
REgards, L

limono · 25th December 2008, 05:08 PM

I will do a straight swap for clean pair of DX4/EX4 with rolled edge wizzer cone (mine are also with new style of cone) . They would probably sell better on "uninformed" market than the "doted" ones

Regards, L

rjbond3rd · 1st January 2009, 11:42 PM

Hi Limono, these are a steal at your asking price, especially with the Beauhorn phase plugs and the eNaBLe. If I were not over-extended in other ways, these would be the drivers I'd get. Lousy timing on my part.

limono · 2nd January 2009, 12:35 AM

Well ,surrounds on the pair I have do differ .One is brownish the other one grayish I'm not sure of the year of production but they have newer rolled edge wizzer cone .The price I ask is about what I paid couple of years ago to some English chap (not incuding shipping) He kindly did not inform me of the fact that drivers are from different production batch -they do sound the same.
So far dealing with Brits brings me no luck at all -nasty,treacherous, world sucking tribe.

nuriasanta · 4th January 2009, 01:18 AM

I'm looking for a pair of DX4 and have found yours.
As I'm a new member I cannot mail you directly, could you mail me back to: pacomarmor at hotmail dot com?
I have some friends living in Detroit so after payment we may arrange local pick up if you agree.

Best Regards.
Paco.

limono · 4th January 2009, 10:20 PM

Here is picture without flash

limono · 4th January 2009, 10:21 PM

here's picture with the flash

limono · 14th January 2009, 10:12 PM

Bump

15th December 2008, 09:23 PM	#1
limono diyAudio Member Join Date: Mar 2007	Lowther DX4 with Bud Purvine Enabl pattern A pair of those first enabled DX4's with Beauhorn small wooden phase plug (also with Enabl pattern) . I bought them used from England (as a pair) but they are from different production run apparently. They are pictures in Bud's Enabl thread. I'm building compression driver based system so time to part with "the best driver in the world " according to some .$1450 shipped in CONUS. I'll give potential buyer 48 hours to decide on the deal but he will have to cover shipping cost in a case he doesn't like them . Regards, Limono

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pattern around tweeter...	Godzilla	Full Range	6	9th December 2008 12:17 PM
How can a CD be adjusted by eye pattern?	PinkPanther-2	Digital Source	2	12th June 2006 07:32 AM
Good Eye Pattern (CDm4/19)	Mikelo	Digital Source	9	26th March 2005 04:58 PM
PCB pattern for 100W Amp	r_s_dhar	Solid State	49	20th August 2004 12:05 PM
Can I post this PCB pattern for the 25W Amp	r_s_dhar	Solid State	2	15th July 2003 06:03 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

17th December 2008, 02:20 PM	#2
limono diyAudio Member Join Date: Mar 2007	I think I'm asking too little for "the best driver in the world " ... I can hagle on price is somebody is really interested . Did I stress enough that Bud himself painted those and original Beauhorn phase plugs are tad expensive to buy?? No trades this time as I'm swamped with drivers and parts already. REgards, L

25th December 2008, 05:08 PM	#3
limono diyAudio Member Join Date: Mar 2007	I will do a straight swap for clean pair of DX4/EX4 with rolled edge wizzer cone (mine are also with new style of cone) . They would probably sell better on "uninformed" market than the "doted" ones Regards, L

1st January 2009, 11:42 PM	#4
rjbond3rd diyAudio Member Join Date: Jan 2007	Hi Limono, these are a steal at your asking price, especially with the Beauhorn phase plugs and the eNaBLe. If I were not over-extended in other ways, these would be the drivers I'd get. Lousy timing on my part.

2nd January 2009, 12:35 AM	#5
limono diyAudio Member Join Date: Mar 2007	Well ,surrounds on the pair I have do differ .One is brownish the other one grayish I'm not sure of the year of production but they have newer rolled edge wizzer cone .The price I ask is about what I paid couple of years ago to some English chap (not incuding shipping) He kindly did not inform me of the fact that drivers are from different production batch -they do sound the same. So far dealing with Brits brings me no luck at all -nasty,treacherous, world sucking tribe.

4th January 2009, 01:18 AM	#6
nuriasanta diyAudio Member Join Date: Jan 2009 Location: Burgos	I'm looking for a pair of DX4 and have found yours. As I'm a new member I cannot mail you directly, could you mail me back to: pacomarmor at hotmail dot com? I have some friends living in Detroit so after payment we may arrange local pick up if you agree. Best Regards. Paco.

14th January 2009, 10:12 PM	#9
limono diyAudio Member Join Date: Mar 2007	Bump