Looking for a transformer for a gainclone

mc_grumpy_d · 25th November 2008, 06:31 PM

Hello,

I am looking for a decent quality toroidal transformer in the 22 volt, 220-300 va range. Does anyone have one to sell?

Thanks very much,

Derek

opc · 25th November 2008, 11:34 PM

Hi Derek,

I live in Ottawa, and I have several toroidal transformers up for sale right now.

Lots of Toroids and Transformers for Sale!!!

Take a look at the list, and let me know if anything is suitable for your amp. You could probably use T38 without any problems as I used to use 28-0-28 transformers in several of the chipamps I made in the past. I'm not sure about the details of your project, but there is also the potential for using a regulated supply if the output power isn't terribly high. Feel free to contact me if you have any questions at all.

We can arrange a pick-up/drop-off which would save the shipping costs.

Cheers,
Owen

mc_grumpy_d · 26th November 2008, 12:39 AM

Hi Owen,

Thanks very much for your offer but I am not sure that I would like to go as high as 26 volts. It's a pitty given that you live here in Ottawa. What are the changes of that? I am also not completely sure of the 230 primary on your T38.

Kind regards,

Derek

zlast · 26th November 2008, 02:37 AM

Check out APEXJR - he also advertises in the VENDOR section:

http://www.apexjr.com/miscellaneous.html

spind · 26th November 2008, 01:25 PM

Derek, you should allow email contact (in your user cp ---'edit options') if you want people to contact you directly. I may have an extra Plitron in that range that you could use, if you are interested.

Steve.

mc_grumpy_d · 26th November 2008, 02:35 PM

I would be interested in the tranformer. Please feel free to send me an email at dleschinsky (at) sympatico (dot) ca.

Due to my recently joining this forum I will have to wait a while to send email. I will however change the email option at your suggestion.

Derek

25th November 2008, 06:31 PM	#1
mc_grumpy_d diyAudio Member Join Date: Nov 2008	Looking for a transformer for a gainclone Hello, I am looking for a decent quality toroidal transformer in the 22 volt, 220-300 va range. Does anyone have one to sell? Thanks very much, Derek

26th November 2008, 02:37 AM	#4
zlast diyAudio Member Join Date: Sep 2004 Location: none	Transformers Check out APEXJR - he also advertises in the VENDOR section: http://www.apexjr.com/miscellaneous.html __________________ none

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6 A transformer for Gainclone ?....help	AndrewGM	Chip Amps	4	1st August 2009 02:12 PM
Transformer for gainclone amp?	imperfectcircle	Chip Amps	4	21st July 2006 05:13 PM
FS: Gainclone + transformer	tomchaoda	Swap Meet	8	1st July 2005 01:35 PM
Gainclone Transformer	gchrist	Chip Amps	2	18th December 2003 05:57 AM
transformer for gainclone	SQ Kid	Chip Amps	12	8th April 2003 05:09 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

25th November 2008, 11:34 PM	#2
opc diyAudio Member Join Date: Oct 2004 Location: Ottawa, Ontario, Canada	Hi Derek, I live in Ottawa, and I have several toroidal transformers up for sale right now. Lots of Toroids and Transformers for Sale!!! Take a look at the list, and let me know if anything is suitable for your amp. You could probably use T38 without any problems as I used to use 28-0-28 transformers in several of the chipamps I made in the past. I'm not sure about the details of your project, but there is also the potential for using a regulated supply if the output power isn't terribly high. Feel free to contact me if you have any questions at all. We can arrange a pick-up/drop-off which would save the shipping costs. Cheers, Owen

26th November 2008, 12:39 AM	#3
mc_grumpy_d diyAudio Member Join Date: Nov 2008	Hi Owen, Thanks very much for your offer but I am not sure that I would like to go as high as 26 volts. It's a pitty given that you live here in Ottawa. What are the changes of that? I am also not completely sure of the 230 primary on your T38. Kind regards, Derek

26th November 2008, 01:25 PM	#5
spind diyAudio Member Join Date: Feb 2003 Location: Winnipeg	Derek, you should allow email contact (in your user cp ---'edit options') if you want people to contact you directly. I may have an extra Plitron in that range that you could use, if you are interested. Steve.

26th November 2008, 02:35 PM	#6
mc_grumpy_d diyAudio Member Join Date: Nov 2008	I would be interested in the tranformer. Please feel free to send me an email at dleschinsky (at) sympatico (dot) ca. Due to my recently joining this forum I will have to wait a while to send email. I will however change the email option at your suggestion. Derek

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)