I wasn't able to buy the B1 boards from PassDIY.com, because they went so fast. I had 5 (min qty) made by Advanced Circuit in Colorado. They were made with the gerber files from PassDIY.com.
The boards are enblazen with "Pass Labs Clone DIY R0 2008"
I'm keeping 2 for myself. The other 3 are for sale.
Pics posted tomorrow.
First 3 PM get them.
I'm asking $29.72 each plus shipping. I accept paypal.
Please note- I'm not interested in making 1 cent off this sale. I just wanted mine. AC provided a minimum. Maybe this will help someone who couldn't get their board also.
Some specs:
• 2-layers, FR-4, 0.062",
1 oz cu plate
• Lead free solder finish
• Min. 0.006" line/space
• Min. 0.015" hole size
• All holes plated
• Green LPI mask • White legend (1 or 2 sides)
• 1 part number per order
(extra $50 charge for multiple parts
or step & repeat applies)
• Max size 60 sq. inches
• No slots (or overlapping drill hits)
• No internal routing or scoring
(including mouse bites)
• Overall dimensions individually routed
PS: I'm very impress at the care Advaced took with my order. The internal follow up is very reassuring.
The boards are enblazen with "Pass Labs Clone DIY R0 2008"
I'm keeping 2 for myself. The other 3 are for sale.
Pics posted tomorrow.
First 3 PM get them.
I'm asking $29.72 each plus shipping. I accept paypal.
Please note- I'm not interested in making 1 cent off this sale. I just wanted mine. AC provided a minimum. Maybe this will help someone who couldn't get their board also.
Some specs:
• 2-layers, FR-4, 0.062",
1 oz cu plate
• Lead free solder finish
• Min. 0.006" line/space
• Min. 0.015" hole size
• All holes plated
• Green LPI mask • White legend (1 or 2 sides)
• 1 part number per order
(extra $50 charge for multiple parts
or step & repeat applies)
• Max size 60 sq. inches
• No slots (or overlapping drill hits)
• No internal routing or scoring
(including mouse bites)
• Overall dimensions individually routed
PS: I'm very impress at the care Advaced took with my order. The internal follow up is very reassuring.
If anyone is interested in 5 more boards, email me by PM or at
vdi_nenna at hotmail dot com. Subject- "B1 Second Run"
Send name and address for shipping.
Price should be the same + 3% paypal + shipping.
It takes about 5 days to turn over the boards.
If there is no interest by 9 am eastern time tomorrow 11/11/08, I will not have them made.
Thanks,
Vince
vdi_nenna at hotmail dot com. Subject- "B1 Second Run"
Send name and address for shipping.
Price should be the same + 3% paypal + shipping.
It takes about 5 days to turn over the boards.
If there is no interest by 9 am eastern time tomorrow 11/11/08, I will not have them made.
Thanks,
Vince
I started stuffing mine last weekend.
Be careful of R1 size. 3 watt metal oxides were bigger than I thought and the 2 large PS filter caps I bought were a little too big also. Also, the two 10uF non-polar caps were hard to find in a small enough size. I think Mr Pass used AEON or Orca. I used Jantzen's and were 2mm too big.
Just a heads up.
The view must be nice!
Vince
Be careful of R1 size. 3 watt metal oxides were bigger than I thought and the 2 large PS filter caps I bought were a little too big also. Also, the two 10uF non-polar caps were hard to find in a small enough size. I think Mr Pass used AEON or Orca. I used Jantzen's and were 2mm too big.
Just a heads up.
The view must be nice!
Vince
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.