Toroid / supply for Pass project????

Zero Cool · 29th September 2008, 11:57 PM

I have a 2ru rack mount power supply for a large DDA Brand console that might be a nice supply for a Pass DIY project.

There is a 20Vct Toroid inside with a large regulator system that supplies +/- 18Vdc at 3 amps per, 6 amps total. also 48vdc at 250ma

The regulator board needs repair. some parts have been removed. thats all i know about it. The pass transistors are there but some smaller TIP types have been removed. Sorry no schematics or other info.

I am willing to remove just the transformer if someone only wanted that part. But i think it would be more interesting with the regulator for a project.

I need to look and see if i have the top cover for the rack box. not sure if its in the pile or not.

Whole thing $40 plus shipping. $30 for just the transformer.

Spasticteapot · 30th September 2008, 12:38 AM

Got any pictures of the 2RU case?
I don't really need the transformer, but will buy both if required.

Zero Cool · 30th September 2008, 02:12 PM

I have other 2ru chassis that are better then this one. How deep do you need is the question??

Zero Cool · 30th September 2008, 05:14 PM

Photos

bichi · 1st October 2008, 09:46 AM

ZeroCool,

from the other thread:

"I have a 40Vct 6 amp transformer forsale!
See: http://www.diyaudio.com/forums/show...threadid=130595"

If thats a 20vac-ct-20vac at 6amps, (~240VA) and has two (2) 115vac primaries, then I'm your buyer.
(see graphic below) Offer is $25 and I pay shipping, cheapest, (ground) USPS to zipcode 94087.
Will PayPal immediately on confirmation and your PayPal account. Can also send cashiers check, if you prefer.

Let me know via site PM/email, if this works for you...

Thanks!

Zero Cool · 1st October 2008, 02:05 PM

Bichi,

Your email is set to admin only. i cant email you. But YES this is exactly as your picture describes! email me at tetech2@doitnow and lets do it up!

Zc

bichi · 1st October 2008, 08:31 PM

both site PM/email and email sent with shipping address.
- used your stated address with "dot com" added

Thanks!
bichi

Zero Cool · 2nd October 2008, 11:34 AM

reply sent!

bichi · 4th October 2008, 05:07 AM

PayPal Payment sent, $45 for "whole thing..."
- Oct 03, 2008 10:00pm PST.
- shipping address included in email to you.
- (Unique Transaction ID #7BU54832J6959212W)

Thanks!
bichi

Zero Cool · 4th October 2008, 03:46 PM

SOLD!!!!!

29th September 2008, 11:57 PM	#1
Zero Cool Audio Junkie diyAudio Member Join Date: Sep 2004 Location: MN	Toroid / supply for Pass project???? I have a 2ru rack mount power supply for a large DDA Brand console that might be a nice supply for a Pass DIY project. There is a 20Vct Toroid inside with a large regulator system that supplies +/- 18Vdc at 3 amps per, 6 amps total. also 48vdc at 250ma The regulator board needs repair. some parts have been removed. thats all i know about it. The pass transistors are there but some smaller TIP types have been removed. Sorry no schematics or other info. I am willing to remove just the transformer if someone only wanted that part. But i think it would be more interesting with the regulator for a project. I need to look and see if i have the top cover for the rack box. not sure if its in the pile or not. Whole thing $40 plus shipping. $30 for just the transformer.

30th September 2008, 12:38 AM	#2
Spasticteapot diyAudio Member Join Date: Jan 2006 Location: Wisconsin....what did you expect?	Got pics? Got any pictures of the 2RU case? I don't really need the transformer, but will buy both if required.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Power Supply (toroid) help	pollypocket	Solid State	9	17th August 2006 10:02 AM
JLH 69 Project, Toroid Selection	tommytube	Solid State	1	7th November 2005 06:47 PM
FS: Aleph 3 Power supply parts, caps, toroid and heatsinks	vsr123	Swap Meet	4	20th March 2005 10:40 PM
500VA, 4X22VAC, Toroid Transformer for the Pass A40 For Sale	roddyama	Swap Meet	2	1st May 2003 01:57 AM
Lowering Supply voltage of a Toroid	PaulHilgeman	Solid State	13	18th February 2003 12:25 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

30th September 2008, 02:12 PM	#3
Zero Cool Audio Junkie diyAudio Member Join Date: Sep 2004 Location: MN	I have other 2ru chassis that are better then this one. How deep do you need is the question??

30th September 2008, 05:14 PM	#4
Zero Cool Audio Junkie diyAudio Member Join Date: Sep 2004 Location: MN	Photos

1st October 2008, 02:05 PM	#6
Zero Cool Audio Junkie diyAudio Member Join Date: Sep 2004 Location: MN	Bichi, Your email is set to admin only. i cant email you. But YES this is exactly as your picture describes! email me at tetech2@doitnow and lets do it up! Zc

1st October 2008, 08:31 PM	#7
bichi diyAudio Member Join Date: Aug 2007	both site PM/email and email sent with shipping address. - used your stated address with "dot com" added Thanks! bichi

2nd October 2008, 11:34 AM	#8
Zero Cool Audio Junkie diyAudio Member Join Date: Sep 2004 Location: MN	reply sent!

4th October 2008, 05:07 AM	#9
bichi diyAudio Member Join Date: Aug 2007	PayPal Payment sent, $45 for "whole thing..." - Oct 03, 2008 10:00pm PST. - shipping address included in email to you. - (Unique Transaction ID #7BU54832J6959212W) Thanks! bichi

4th October 2008, 03:46 PM	#10
Zero Cool Audio Junkie diyAudio Member Join Date: Sep 2004 Location: MN	SOLD!!!!!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)