• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Moving Sale

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Terms:

Non-credit card PAYPAL accepted. Cost + Shipping

For sale:

3 original LEACH amp boards - fully populated and working (does not include TO-3 output transistors - but does include TO-3 sockets) ONly issue is one of the input pads has come loose because of resoldering. $20 each

2 ASCENDANT AUDIO ATLAS 15 inch subs. NEW in the box unused. $100 each

2 - Original NHT 1259- purchased from Ken Kantor. ONe is unused the other around 30-40 hours mild use. $100 each

1 - 4 channel KRELL KSA 50 clone. Uses 3 pairs MJl21193/4 per board. 1% metal film resistors. This is force air cooled. Pics seen here:
http://www.diyaudio.com/forums/showthread.php?postid=949974#post949974

120000 UF per rail, 2000VA transformer. Soft start. Only issue is soft start relay sometimes sticks ($5 relay). VERY HEAVY ! like 80 pounds. Asking $300 + shipping.

1 COUSTIC 600SE car audio amp - works fine - some cosmetic damage. $50

1 pair of MURPHYBLASTER OW-1s using Hiquphon OW1 tweeter.
Nice black handmand MDF cabinets. High quality crossover components. $200 pair (price of the tweeters alone)

1 pair WHARFEDALE DIAMOND 8.1 bookshelf speakers in black. like new condition. $75 pair

1 LIGHTNING AUDIO FF150.2 amp. Like new condition. $30


8 - MJl15004 TO-3 ONSEMI transistors. Used in LEACH AMP boards above. $2 each

6 NTE60 (MJ15003) NTE TO-3 transistors, Used in leach amp boards above $2 each

2 MJ15003 ONSEMI TO-3 transistors used in leach amp board above. $2 each

8 SANGAMO TYPE DCM253UO75DC2B capacitors. 75 volts at 25000UF. 3 inch diameter and 4 inches high. Screw terminals. Been sitting on the shelf for several years, seem to hold quiet a charge. $5 each


I am located in Knoxville TN (37916) if you want to estimate shipping or think about picking something up. I am VERY busy. There is a wealth of information on the web concerning most the above, if you are sincerely interested and have specific quetions, then ask. Email : zlast@yahoo.com
 
Murphyblaster MBOW1 parts

OK, the cabinets were damaged. SO I removed the mids, Hiquphon OW-1 tweeters and crossovers. Crossovers are all AXON caps, metal film, large gauge air core. Sell all for $150 + shipping.


Also have a 1/2 HP continuous duty electric motor (new)
CHICAGO ELECTRIC
230/120 volt. wired forf 120 right now.
Model CVK 5617D1140 HP. Safety factor 1, 1725 rpm with slotted 5/8 shaft. ASking $25 + shipping, think I can get it in a flat rate USPS box.

ASLo a BOSTON 700 series gear reducer. Worm drive 15:1 gear reducer with 5/8 inch slotted input and 3/4 inch slotted output shafts.
In great shape- can turn easily by hand. $25 + shipping is a steal :)
Should fit in a flat rate USPS box for USA.
 
For sale Update

For sale: Prices do not include shipping

(PENDING SALE) 3 original LEACH amp boards - fully populated and working (does not include TO-3 output transistors - but does include TO-3 sockets) ONly issue is one of the input pads has come loose because of resoldering. $20 each

2 ASCENDANT AUDIO ATLAS 15 inch subs. NEW in the box unused.
Long throw XBL2 motor - cast aluminum frame - perfect for home theater or doing some body modification to your vehicle. $75 each

2 - Original NHT 1259- purchased from Ken Kantor. ONe is unused the other around 30-40 hours mild use. $75 each

(PENDING SALE)1 - 4 channel KRELL KSA 50 clone. Uses 3 pairs MJl21193/4 per board. 1% metal film resistors. This is force air cooled. Pics seen here:
http://www.diyaudio.com/forums/show...9974#post949974

120000 UF per rail, 2000VA transformer. Soft start. Only issue is soft start relay sometimes sticks ($5 relay). VERY HEAVY ! like 80 pounds. Asking $300 + shipping.


1 pair of Hiquphon OW-1s tweeter. Hand made and matched to 1% accuracy. Maybe best dome tweeter period. HAve GR Research M130 mids in perfect condition and high quality mid/tweeter (large guage air core inductors, Axon caps) for Murphyblaster MBOW-1s speaker:
http://murphyblaster.com/content.php?f=MBOW1.html

For $125 + shipping you get tweeters, mids and crossovers !
(Tweeters alone are $200 new)

1 pair WHARFEDALE DIAMOND 8.1 bookshelf speakers in black. like new condition. $50 pair

1 LIGHTNING AUDIO FF150.2 amp. Like new condition. $25


8 - MJl15004 TO-3 ONSEMI transistors. Used in LEACH AMP boards above. $2 each

(PENDING SALE)6 NTE60 (MJ15003) NTE TO-3 transistors, Used in leach amp boards above $2 each

2 MJ15003 ONSEMI TO-3 transistors used in leach amp board above. $2 each

8 SANGAMO TYPE DCM253UO75DC2B capacitors. 75 volts at 25000UF. 3 inch diameter and 4 inches high. Screw terminals. Been sitting on the shelf for several years, seem to hold quiet a charge. $4 each

(1) AUTOTEK 7600BTS car audio amplifier in perfect condition. 300 watts stereo/900 mono - real old school power $100 + shipping

(2) ADIRE TEMPEST 15 inch subwoofers- dual 8 ohm voice coil, XBL2 motor in great shape. $50 each + shipping

(1) 6 channel LEACH amp - features 1500VA transformer, dual 50 amp rectifiers, 100000UF per rail. Uses 2 ONSEMI MJ15003/4 per output. Works perfectly - basically unused since I built it, can see pics here:
http://www.diyaudio.com/forums/showthread.php?s=&threadid=55936&highlight=

Asking $250 + shipping - hate to let it go :(
 
Ascentand

Also, it appears that Ascendant offered a low Q, mid Q and high Q version of those Atlas woofers, do you recall which ones these are?




ALL the same driver - you adjust the "Qts" with a wire or resistor across one set of terminals (I have the original Ascendant data for enclosures and setup)
 
Free STUFF

Anyone withing driving distance (Knoxville TN)


ONe 9 ft3 vented enclosure tuned to 19 Hz, great EBS enclosure
Dimensions are 16 X 24 X 48 inches - has cutout for 15 inch - TEMPEST fits perfectly. Made from plywood (not finished), braced. Free for whoever wants to lug it off.

One 30 Hz tapped horn - MDF 14 X 17 X 73 inches with an EOSONE 12 inch in it - has tapped metal inserts for driver mounting so you can take driver in and out easily through the mouth. Thats right...FREE.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.