IC/FS: speaker drivers, transformers, opamps, resistors, capacitors, etc.

[needtubes]

Hello all-

I am moving into an apartment, so most of my extra things need to disappear. I cannot bring myself to throw them out, since they may be of use to someone else, and I'd rather see my spare parts used rather than tossed.

I have available:

two DS1802 DIP-20 digital potentiometers (just add switches)
two AD811AN DIP-8 opamps
two HA3-5033-5 DIP-8 buffers
one International Rectifier IRF510 TO-220
two Fairchild IRF610B TO-220
two LT1206-CT7 TO-220-7 opamps
misc. small transistors
four (two red/black pairs) gold-plated binding posts with long stems
four (two red/black pairs) regular short-stemmed binding posts
another binding post with short stem (red/black)
two gold-plated RCA jacks
two gold-plated 1/8" jacks
four regular 1/8" jacks
Misc. high-voltage caps
Misc. low-voltage caps (Nichicon, United Chemi-Con, etc.)
a few film-types
two Solen 1uF, 400V polypropylene caps
lots of 1% 1/4W metal film resistors
some assorted carbon film resistors
some older carbon-comp looking resistors
a few power resistors
several small trimpots
one 10k stereo mini-potentiometer- great for small amp builds
Assorted (approx. 25 total) Holco/Holsworthy H8 Precision (non-magnetic) 1/4W metal film resistors (values I remember are 221, 681, 6.87k, 169K, 681K - maybe more)
assorted LEDs, mostly green, red, yellow
three rectifier bridges
misc. diodes (only a few)
several voltage regulators - +/-5V, +6V, +/-12V (I think)
one large lamp/lightbulb holder
one flat rocker switch
one large toggle switch
one push-button switch
one 9V battery clip
one IEC 3-prong power jack
two vintage (?) GE 6GM8 from Germany in boxes
two (old) 9-pin mini sockets
two (old) 7-pin mini sockets
one new (and NICE) 9-pin mini ceramic socket with gold-plated contacts and pins
four aluminum heatsinks, three silver one black
the black heatsink has a detachable fan
also includes an odd heatsink used for soldering heat-sensitive components
three spools magnet wire, various guages
one spool hookup wire (24 guage?)
about 3-feet 18-guage silver-plated copper stranded teflon-coated wire
about 2-feet 22-guage silver-plated copper stranded teflon-coated wire
RadioShack 6" Experimentor 300 solderless breadboard
RadioShack 4.5"x6" blank two-sided copper-clad un-etched PC-board
Misc. (about six, I think) power transformers, some large
Misc. sealed lead-acid battery charging circuits on PCBs (tons of these)
15" Kustom PA woofer (large square magnet)
8" PA/musical instrument woofer from Fender Champ
two 4x6 full-range speakers (unknown origin...)
large (about 6" across) donut magnet
.................................................. .............................................

There may be more. This is all that I had listed as of about a month ago (I have been putting off writing this post because of the length...). I know everyone will want details on the transformers... And, I'll get them as soon as I can make myself go up to the attic.

I can take pictures, if anyone really wants... But, since there is quite a bit of stuff, I am reluctant to do this unless it is necessary.

I would prefer to sell as a lot, if possible. But, if you really want just one part, I could do this.

If anyone is interested, I would like some remuneration for the parts... But I don't expect much since shipping on all this stuff is likely to be somewhat high.

Thanks all...

[Zero Cool]

did you ever sell this stuff???