Magura said:
Just wait till Mrs. Magura finds out, that I no longer need the 500uF 630V PP in oil caps, that are in my test PSU
Magura
OK
I'll write PM to her
then you'll send them to Serbia , for proper disposal
Zen Mod said:
OK
I'll write PM to her
In that case I'll send you for proper disposal, probably in Serbia
Magura
Magura said:
In that case I'll send you for proper disposal, probably in Serbia
Magura
naah .......
we are here in Serbia properly disposed .......... few decades already .........
but life is still good ......
Zen Mod said:
but life is still good ......
Well, if you want your life to remain good, I suggest that you don't become the reason, that I will no longer have a 12.000uF 630V PP in oil cap bank
Magura
Peter M. said:Hi Magura.
How many have you got?
Regards,
Peter
I have 14 caps left. 18 if Zen Mod does not behave
Magura
Zen Mod said:
Magura said:Ok, it seems I have 14 left
Magura
Zen Mod said:
10?
6?
2?
naaah...........
luvdunhill said:is steenoe still going to be your money launderer? still waiting, don't forget about me...
limono said:I'm waiting too (for two
Yes, as he is the only one I know in Denmark, who has a registered paypal account.....
Waiting for him to read his email.
Magura
luvdunhill said:sent money. I'd buy more, but shipping is killer...
Ahem, shipping is actually not all that bad, once past the price for sending 5kg. After that it's down to roughly 8usd per kg, aka. per 1 cap, as they weigh in at 1kg a piece.
Anyhow, I'm down to 6 pcs, so Mrs. Magura is happy
I will ship the caps out this Friday.
Magura
my plan to stock pile in Iceland is working nicely.
anyways, what would you guys recommend to bypass these? my usually recipe is 10% main value for bypass, repeat until you're under 1uF. So, that would be 3900uF, 390uF, 39uF, 3.9uF, .39uF.... seems a bit insane though. Also, I like to increase the voltage rating as I go smaller.... throw in some polystyrene somewhere and beg Jacco for super-secret-rare caps... any recommendations?
anyways, what would you guys recommend to bypass these? my usually recipe is 10% main value for bypass, repeat until you're under 1uF. So, that would be 3900uF, 390uF, 39uF, 3.9uF, .39uF.... seems a bit insane though. Also, I like to increase the voltage rating as I go smaller.... throw in some polystyrene somewhere and beg Jacco for super-secret-rare caps... any recommendations?
luvdunhill said:my plan to stock pile in Iceland is working nicely.
anyways, what would you guys recommend to bypass these? my usually recipe is 10% main value for bypass, repeat until you're under 1uF. So, that would be 3900uF, 390uF, 39uF, 3.9uF, .39uF.... seems a bit insane though. Also, I like to increase the voltage rating as I go smaller.... throw in some polystyrene somewhere and beg Jacco for super-secret-rare caps... any recommendations?
If you have room, I have a nice little 500uF PP in oil film cap to recommend as the first bypass, Comar 50uF PP film for the next, the rest.....Rifa PHE426.
Magura
Magura said:
If you have room, I have a nice little 500uF PP in oil film cap to recommend as the first bypass, Comar 50uF PP film for the next, the rest.....Rifa PHE426.
Magura
what's that shady PayPal address again?
There is always room for oil film. I'm interested if Mrs. Magura needs to firesale those as well
luvdunhill said:
what's that shady PayPal address again?
There is always room for oil film. I'm interested if Mrs. Magura needs to firesale those as well
They are the size of about 3 beer cans on top of each other.....
Still got that much room?
Magura
luvdunhill said:
I'm interested if Mrs. Magura needs to firesale those as well
Mrs. Magura is happy whenever she sees anything that size go out the door
Magura
EDIT: I haven't been told to get rid of them yet, as she has seen them in use from time to time.....but I might as well cut back on some of them before I will be told to get rid of them all
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.