|Swap Meet Sell your stuff here, who knows, some other fanatic might be interested!|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|28th April 2008, 11:37 PM||#1|
Join Date: Aug 2005
FS Heatsinks, tubes, drivers and amps.
Ok so I am moving and I need to purge some stuff. Buyer pays half shipping cost and insurance if you want any. Paypal only. I need to pass this stuff along to someone who will use it and I am not going to have room to take it with me.
Email any questions. Eric@ericparham.com I may have some more stuff add if I can find the time.
Heatsink 1, I have 2 this size. 8"x9" with 1" fins. there are stand offs on the back and they have been drilled will work great for any amp you might be building.
10.00 usd each
Heat sink 1
Heat sink 2, I have 3 this size 16" x 9" with 1" fins. Same as the first ones just larger.
20.00 usd each
Heat sink 2
Pair of Scan speak 2010-8513 tweeters. They are used but work perfectly. The foam on the fronts are scuffed up a little but I could never tell the difference. The domes are perfect.
40.00 usd for pair
I have four Sovtek 6h30pi's never used brand new in box.
40.00 usd for all
Aleph X boards. I have two channels of Aleph X boards from this thread
One channel is just the boards, main board and 4 driver boards. There are irfp's on the driver boards and they where matched and working but I have no idea if they are any good. The second channel is working. It has irfp 240's and .398 source resistors and just needs a power supply and heat sinks. It was up and running with 20v rails.
Aleph Mini Includes four heat sinks just like the first in my post, ps board, driver boards, xlr's and transformer. One channel works fine and the other needs the output transistor replaced. Other than that it is in fine condition. I will include a few extra output devices.
Last item is a Twisted X-BoSoZ preamp built from a few twisted pear kits.
This is a working amp. You get everything you see. 2 channels for the preamp 1 ps board. ( I used the other one for something I can't remember ) balanced Joshua tree attenuator, balanced Darwin source selector, case, heatsinks and power cord. It is set up for 4 rca inputs and balanced or rca outputs.
|28th April 2008, 11:53 PM||#2|
problem with pictures
without a membership they can't be viewed.
Even logged in to myspace the pictures are still marked as 'private'.
FYI picasa is free and doesn't require anything except a link...
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Tubes and amps basement clearout||whitelabrat||Swap Meet||24||25th March 2009 12:15 PM|
|Any of these tubes good for amps?||PRNDL||Tubes / Valves||1||3rd March 2007 02:27 PM|
|wtb books on tubes/tube amps||vixr||Swap Meet||1||18th February 2006 10:10 AM|
|Caps, xformers, rectifiers, heatsinks, Zen PCBs, tubes and jacks||krikor111||Swap Meet||13||15th February 2005 02:42 AM|
|Availability of 6C33C tubes? I need some for OTL amps||tubetvr||Tubes / Valves||39||31st January 2003 08:21 PM|
|New To Site?||Need Help?|