Compression Drivers

[Magnetar]

JBL 2440 pr 500.00
JBL 2480 pr 500.00
TAD 4001 pr 700.00
Cerwin Vega 1601 750.00 pr
Vitavox S2 450.00 pr
Emilar EC320A 500.00 pr
Altec 288a 400 pr
Altec 292 550 pr

All working perfectly and fully tested with impedence, frequency and distortion sweeps as well as CSD - many with cosmetic problems - Others available just email

All plus shipping

 

[Vil]

please email me , I am interesting in some drivers , but your email is disabled .

Vil

 

[SEIJI]

I am interested in buying your vitavox s2

my email: mascot111@live.com

Thank You

 

[panos29]

Interested in the TADs and 2440s, possibly S2s

Thanks

 

[mordikai]

Hi,
interested in the vitavox s2's, 288's, and 292's. What is there cosmetic condition? What brand and the condition of the diaphragms they have?
What is the impedance of each?
thanks,
mordikai

 

[Magnetar]

JBL 2440 pr 500.00 SOLD
JBL 2480 pr 500.00 PENDING
TAD 4001 pr 700.00 SOLD
Cerwin Vega 1601 750.00 pr
Vitavox S2 450.00 pr SOLD
Emilar EC320A 500.00 pr
Altec 288a 400 pr SOLD
Altec 292 550 pr PENDING

All working perfectly and fully tested with impedence, frequency and distortion sweeps as well as CSD - many with cosmetic problems - Others available just email

All plus shipping

Some of these are sold as posted above. I posted this yesterday but someone deleted it!

You can contact me via email or private messegering. Unless someone is screwing with that too. I checked and it is setup correctly. Thanks

 

[Vil]

>>>>You can contact me via email or private messegering


Well , thats not working , at least for me ...

 

[winslow]

Neither are there for me either.

I was wanting those TADs. Have any 2k series TADs?

Or cone drivers?

 

[matsj]

Any moore Tads ? And same as winslow.

mats

 

[Magnetar]

The CV 1601's are left - these are very nice sounding drivers with phenolic diaphragms 300 to 6K response 'Vintage' warm sweet lucid midrange sound with the right horn- 2" exit large format REDUCED to 300 for the pair

Emilar One Plus Engineering EC320C 2" exit large format aluminum diaphragm with mylar surround. These are IMO better than the TADs in tone and listen ability (low fatigue, yet high resolution) - REDUCED to 300 for the pair

Only TADs on hand I have left/want to let go are TM 1201's that need reconed - 150 for the pair - MONSTER magnets yet fragile carbon cone. These are probably expensive to recone to original - I was going to recone them with a paper cone and Jensen style Flexair surround.

My email seems to be working now