|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Swap Meet Sell your stuff here, who knows, some other fanatic might be interested! |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
16th April 2008, 06:32 PM
|
#1 |
|
diyAudio Member
Join Date: Jan 2002
Location: Tyrone Ga. U.S.A.
|
FS amp cases
I have 2 amp cases for sale. They measure 16" w 14" d 6: h
One of them housed a Pass A40 but with it disipating 200w it ran too hot so I scaled it down to a 20w version of the A40 with 100w disipation which it handled fine. In one of the photos you can still see the 3 pair of output devices still mounted. This case is a little rough. It has 2 removiable rails that bolt to the heatsinks drilled for 3 pair of TO3 devices per rail. The other case is the same except the transistor mounting rails are drilled for only 2 pair of to3 devices per rail. This one still has the power supply and one chanel of the DEAD amp. This power supply is + - 65v at ~500va. I would prefer to sell these as a set for $150 + shipping from 30290. I will remove that transformer if you don't want it as it weighs about 20lb and will make the shipping a lot higher. This is a firm price no trades. |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Amp Cases | x. onasis | Swap Meet | 8 | 23rd September 2004 08:05 PM |
| where to look for cases | roofingboom | Solid State | 6 | 31st May 2004 04:57 PM |
| GC cases | x. onasis | Chip Amps | 13 | 19th March 2004 11:05 PM |
| New To Site? | Need Help? |
| Page generated in 0.08050 seconds (70.80% PHP - 29.20% MySQL) with 11 queries |
