Aluminum oxide insualtion pads for TO-247

Peter Daniel · 6th March 2003, 07:48 PM

I'm selling those pads at $0.50USD a pc. Those are NOT beryllium oxide and are otherwise safe.

Any amount available.

trigon · 6th March 2003, 08:30 PM

Haw many do you have I am interested Peter

e-mail me k?

Trigon

Peter Daniel · 6th March 2003, 08:32 PM

I have 500.

Peter Daniel · 7th March 2003, 01:40 PM

I'm receiving lots of e-mails asking for shipping cost and availability.

There is a flat rate for shipping: $5 USD worldwide. And I will have enough of those pads for everybody.

Payment is by cash, MO or Paypal (3% applies).

Peter Daniel · 21st March 2003, 09:34 PM

Just to let everybody interested to know that I still didn't received my pads yet. I ordered 500 from a supplier and was informed that the shipment would be within 4 days. I called today and it appears that it's on backorder and first date that pads will be available is April 23. It will take 4 days from that day to ship to me and then I will be able to fill all your orders. So if somebody cannot wait that long I will gladly refund your money, or if somebody is interested in the product I will gladly take more orders. Either way works fine with me.

Peter Daniel · 24th April 2003, 03:18 PM

I got confirmation on my order and it's been sent to me today. I will be resending the individual requests soon

CH2 · 25th April 2003, 01:45 AM

Hi

I am interested. Just would like to find out more. Is this something like Si Pad? How does it compare with Si Pad? Do I use this with or without thermal gel?

Thanks
CH2

Peter Daniel · 25th April 2003, 02:42 AM

I don't know what's Si pad. You need grease. It is very hard and brittle material, about 1/16" thick, almost like ceramic.

Peter Daniel · 2nd May 2003, 01:48 AM

All packages has been sent out today.

Variac · 2nd May 2003, 04:45 AM

Hi Peter,
I don't know much about these. Are their specs better than Mica?

6th March 2003, 08:32 PM	#3
Peter Daniel diyAudio Member Join Date: Jul 2002 Location: Toronto, Canada	I have 500. __________________ www.audiosector.com “Do something really well. See how much time it takes. It might be a product, a work of art, who knows? Then give it away cheaply, just because you feel that it should not cost so much, even if it took a lot of time and expensive materials to make it.” - JC

7th March 2003, 01:40 PM	#4
Peter Daniel diyAudio Member Join Date: Jul 2002 Location: Toronto, Canada	I'm receiving lots of e-mails asking for shipping cost and availability. There is a flat rate for shipping: $5 USD worldwide. And I will have enough of those pads for everybody. Payment is by cash, MO or Paypal (3% applies). __________________ www.audiosector.com “Do something really well. See how much time it takes. It might be a product, a work of art, who knows? Then give it away cheaply, just because you feel that it should not cost so much, even if it took a lot of time and expensive materials to make it.” - JC

21st March 2003, 09:34 PM	#5
Peter Daniel diyAudio Member Join Date: Jul 2002 Location: Toronto, Canada	Just to let everybody interested to know that I still didn't received my pads yet. I ordered 500 from a supplier and was informed that the shipment would be within 4 days. I called today and it appears that it's on backorder and first date that pads will be available is April 23. It will take 4 days from that day to ship to me and then I will be able to fill all your orders. So if somebody cannot wait that long I will gladly refund your money, or if somebody is interested in the product I will gladly take more orders. Either way works fine with me. __________________ www.audiosector.com “Do something really well. See how much time it takes. It might be a product, a work of art, who knows? Then give it away cheaply, just because you feel that it should not cost so much, even if it took a lot of time and expensive materials to make it.” - JC

24th April 2003, 03:18 PM	#6
Peter Daniel diyAudio Member Join Date: Jul 2002 Location: Toronto, Canada	I got confirmation on my order and it's been sent to me today. I will be resending the individual requests soon __________________ www.audiosector.com “Do something really well. See how much time it takes. It might be a product, a work of art, who knows? Then give it away cheaply, just because you feel that it should not cost so much, even if it took a lot of time and expensive materials to make it.” - JC

25th April 2003, 02:42 AM	#8
Peter Daniel diyAudio Member Join Date: Jul 2002 Location: Toronto, Canada	I don't know what's Si pad. You need grease. It is very hard and brittle material, about 1/16" thick, almost like ceramic. __________________ www.audiosector.com “Do something really well. See how much time it takes. It might be a product, a work of art, who knows? Then give it away cheaply, just because you feel that it should not cost so much, even if it took a lot of time and expensive materials to make it.” - JC


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

6th March 2003, 08:30 PM	#2
trigon diyAudio Member Join Date: May 2002 Location: Canada	Haw many do you have I am interested Peter e-mail me k? Trigon

25th April 2003, 01:45 AM	#7
CH2 diyAudio Member Join Date: Sep 2002 Location: Singapore	Hi I am interested. Just would like to find out more. Is this something like Si Pad? How does it compare with Si Pad? Do I use this with or without thermal gel? Thanks CH2

2nd May 2003, 01:48 AM	#9
Peter Daniel diyAudio Member Join Date: Jul 2002 Location: Toronto, Canada	All packages has been sent out today. __________________ www.audiosector.com “Do something really well. See how much time it takes. It might be a product, a work of art, who knows? Then give it away cheaply, just because you feel that it should not cost so much, even if it took a lot of time and expensive materials to make it.” - JC

2nd May 2003, 04:45 AM	#10
Variac diyAudio Editor Join Date: Dec 2001 Location: San Francisco, USA	Hi Peter, I don't know much about these. Are their specs better than Mica? __________________ Burning Amp Festival Sunday, October 28th, 2012 in S.F. We need Volunteers & sign-up's for what you're bringing!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Aluminum Oxide vs. Sil Pad Insulators	zox2003	Solid State	29	15th December 2006 08:53 PM
Black oxide screws	d3imlay	Parts	3	12th November 2006 09:58 AM
Beryllium Oxide Question	psychokids	Solid State	11	27th December 2004 06:18 PM
Wanted TO-247 Beryllium Oxide pads	dshortt9	Swap Meet	16	1st July 2002 09:48 PM
Aluminium oxide washer ??	ergo	Solid State	15	8th October 2001 04:59 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read