EnABL kit

Ed LaFontaine · 22nd March 2008, 03:26 AM

Provided there is enough interest, I will assemble and provide a "kit", intended for the installation of "EnABL" patterns on loudspeaker driver cones.

This kit will include the following:

1) type B nib holder
1) set, A-1 through A-5 Speedball pen nibs (5 nibs)
1) #56 Speedball pen nib
1 oz. Microscale MI-4 Gloss coat
1/2 oz. Floquil Poly Scale #404106 flat finish (stealth finish)

Mailed within the continental US, in a 6" x 9" bubble mailer. The liquids will be enclosed in their own zip-lock bag.

For the tidy sum of $26. Others (outside US) subject to adjustment based upon actual cost of postage.

Preferred payment method is by paypal. This will begin only after sufficient interest is expressed. Post your interest here or to me via the forum e-mail.

You will need to source the brush of your choice to install the Gloss Coat & containers to dilute the finish to suitable viscosity for application.

Subject to change.

Carlp · 22nd March 2008, 05:33 AM

Heck, I'll bite. But that doesn't mean I believe...

Carl

planet10 · 22nd March 2008, 06:26 AM

Thanx for putting this together Ed... i can cross this task from my queue

dave

Cambe · 22nd March 2008, 02:25 PM

I will take one.
Thanks Ed.
Cambe

bassrogue · 22nd March 2008, 02:30 PM

Yes, I'd buy one.
Thanks!

cwujek · 22nd March 2008, 02:39 PM

I'm game.

pchw · 22nd March 2008, 04:52 PM

Joining the group :-)

limono · 22nd March 2008, 05:41 PM

I will take one too. I still haven't decided if I love more my enabled DX4 than hate but I have a few Rat Shack drivers and old vintage clunkers which may benefit from the pattern .
Regards. L

renfrow · 22nd March 2008, 05:41 PM

I would also like a set.

Tom.

limono · 22nd March 2008, 05:44 PM

I haven't read trough all literature but did anybody post pattern templates for different size drivers ??

22nd March 2008, 03:26 AM	#1
Ed LaFontaine ...truth seeker... diyAudio Member Join Date: Feb 2004 Location: where the Appalachians rise from the Blue Grass	EnABL kit Provided there is enough interest, I will assemble and provide a "kit", intended for the installation of "EnABL" patterns on loudspeaker driver cones. This kit will include the following: 1) type B nib holder 1) set, A-1 through A-5 Speedball pen nibs (5 nibs) 1) #56 Speedball pen nib 1 oz. Microscale MI-4 Gloss coat 1/2 oz. Floquil Poly Scale #404106 flat finish (stealth finish) Mailed within the continental US, in a 6" x 9" bubble mailer. The liquids will be enclosed in their own zip-lock bag. For the tidy sum of $26. Others (outside US) subject to adjustment based upon actual cost of postage. Preferred payment method is by paypal. This will begin only after sufficient interest is expressed. Post your interest here or to me via the forum e-mail. You will need to source the brush of your choice to install the Gloss Coat & containers to dilute the finish to suitable viscosity for application. Subject to change. __________________ ...call me Ed...Special Ed... http://www.diyaudio.com/forums/swap-...enabl-kit.html

22nd March 2008, 06:26 AM	#3
planet10 frugal-phile(tm) diyAudio Moderator Join Date: Oct 2001 Location: Victoria, BC, NA, Sol III Blog Entries: 3	Thanx for putting this together Ed... i can cross this task from my queue dave __________________ community sites t-linespeakers.org, frugal-horn.com ........ commercial site planet10-HiFi 7th Annual Vancouver Island diyFEST, 21-aug-10

22nd March 2008, 04:52 PM	#7
pchw diyAudio Member Join Date: Apr 2006 Location: Fremont, California	Joining the group :-) __________________ - Fred -

22nd March 2008, 05:41 PM	#9
renfrow diyAudio Member Join Date: May 2005 Location: Salt Lake City, Utah, USA	I would also like a set. Tom. __________________ Now, we can do this the hard way, or... well, actually there's just the hard way. -- Buffy Summers (Buffy the Vampire Slayer)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

22nd March 2008, 05:33 AM	#2
Carlp diyAudio Member Join Date: May 2006	Heck, I'll bite. But that doesn't mean I believe... Carl

22nd March 2008, 02:25 PM	#4
Cambe diyAudio Member Join Date: Aug 2001 Location: USA,NorthCarolina	I will take one. Thanks Ed. Cambe

22nd March 2008, 02:30 PM	#5
bassrogue diyAudio Member Join Date: Mar 2006 Location: Yelm, WA	Yes, I'd buy one. Thanks! __________________ Just once I wish someone would call me "Sir" without adding, "you're making a scene"

22nd March 2008, 02:39 PM	#6
cwujek diyAudio Member Join Date: May 2007	I'm game.

22nd March 2008, 05:41 PM	#8
limono diyAudio Member Join Date: Mar 2007	I will take one too. I still haven't decided if I love more my enabled DX4 than hate but I have a few Rat Shack drivers and old vintage clunkers which may benefit from the pattern . Regards. L

22nd March 2008, 05:44 PM	#10
limono diyAudio Member Join Date: Mar 2007	I haven't read trough all literature but did anybody post pattern templates for different size drivers ??

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)