• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Scan Speak Drivers

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
sbrtoy

sbrtoy

Member
Joined 2003
I have one Scan Speak 23w/4557 sub with the black cone and the matching passive radiator also with black cone, both new in box. Work well together in a very small enclosure (1cu ft.) yielding response down to 25hz. Very high quality drivers, retail for $297 and $128 at Madisound, sell both for $350 plus shipping. I want to sell them together, won't separate and prefer not to sell international.

Here is the info from Madisound on the 23W:

The Scan-speak 23W/4557T is a very high end subwoofer, designed to be used with a passive radiator in a small enclosure. This sub has a very rigid aluminum cone, low loss rubber surround and cast frame. The passive radiator is similar, but with a weight attached to the bass of the cone. The 23W/4557T is using the SD-1 motor system. There are gold plated binding posts and the woofer is covered by a decorative rubber cap.
Frequency response with the passive is down to 25Hz. One cubic foot sealed has an F3 of 33Hz.

TECHNICAL DATA:
Sensitivity 2.83V/1M 82 dB
Free air resonance Fs 20.5 Hz
DC resistance 3.45 ohm
V.C. inductance 0.45 mH
Power 225 W
Effective cone area 232 cm2
V.C. diameter 50 mm
VC height -
Air gap -

Lin. & max. excursion ±13 / ±20 mm
Air gap flux density -
Force factor BL Product 9.3 Tm
Moving mass incl. air 101 g
Net weight 4.6 kg
Vas 45.6 ltrs
Qms 4.8
Qes 0.52
Qts 0.47

Outside diameter: 255mm
Cut out: 225mm
Depth: 135mm
25.4mm = 1" = 2.54cm

Use as is or with 23W passive radiator.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom